Klnord

https://studebaker-info.org/Vendors/leroycary.jpg

https://www.tanksinc.com/index.cfm/page/ptype=product/product_id=216/category_id=133/mode=prod/prd216.htm Have you looked at Tanks Inc? They might be able to locate the filler on the left front, you'd have to inquire.

I've got a couple of pretty rough looking ones. If you're interested.

https://antiquestudebakerclub.org/upcoming-events/

Ajay, I have this assembly,if the pic works,. But do not know condition, or year, or what Studebaker model it came out of. Is this close to what your looking for? Kevin

My son & I have a 36 Dictator. No overdrive so it's within 45 miles of home,usually. We did haul it to Cedar Rapids Iowa in 2009, for the Iternational Meet.

I'm kind of curious, I have 3, "36" Dictator 4dr sedans and all are the same. Can a person tell a tenite knob, from a chrome one? The mechanism in my picture, is from the rear door, passenger side. I've heard there was an option of a vent window for the front. So I'm assuming there would be a different mechanism for that option. The mechanism in Don's pic is what I have in all of my front doors. It's something I had never seen or heard of before. The window slides straight back a couple inches then goes down. And when all the way up, slides forward again to seal up. How many years and models was this used on? Kevin

Hope this helps.

Frank, My car is a Dictator. Here is a few shots of how the wires run on my parts car. The backfire switch: I noticed you said exhaust manifold, it's actually on the intake manifold. But you probably knew that. Kevin

Pix of installed Startix, I hope the pictures help,some are not real good. Kevin

So what year is this from? <CENTER></CENTER>