broker-len

please contact at bobnroman@yahoo.com

Please contact me at bobnroman@yahoo.com

some on told me I do not know contact at bobnroman@yahoo.com

please contact at bobnroman@yahoo.com

look at pictures contact me at bobnroman@yahoo.com

been told this is 39 to 41 Chrysler rear window rubber very high quality please contact me at bobnroman@yahoo.com

Try Le Baron bonny have their cloth in my 31 Plymouth

If you work on cars you probably have gotten grease where if doesn't belong car seats-----here is a trick that will work on cloths also leaving no residue-------------------LIGHTER FLUID----------let me know what you think------------------------BR

I would NEVER send money with out a picture NEVER most times you will know by asking technical questions the response will tell you no pictures no money never

I'll bet the PICKERS on TV would pay it and say it is a great daal

I do business on the Web Real Estate had 7 needed to get new computer all I could get was HP Windows 9 took me 6 months to start learning it was offered an upgrade NO WAY

Hey Dave it/s Bob Romano have not had my cars out this summer how are you ? still have the A

if you own a old car you should have basic knowledge about how a motor works find a picture !! if you drain the oil and crawl underneath and take the pan bolts off and take and pan down you may find the problem eather one of the pistons is lose or one of the bearings----------- what des REBUILT really mean !!!!! maybe they did not clean out the oil passages in block and one or more bearings starved for oil if it is banging that bad you will see the problem

Thanks so much for all the feed back after I painted the undercarage I sent my break cyclinders to get resleaved put everything back carefully and while I was bleading they leaked replaced the brass washers and they still leaked that is how I found out the fluid eats paint working on resolving the leads has any one used epoxy paint on springs and axels BR

Thanks for all the Posts I took my front axel down and springs apart put primer and rustolium made it sit for several months I did investigate options was going to use epoxy enamal but I think I was told it would not flex on the springs and maybe crack not happy with the rustolium,,,,, looks great but if you have a brake fluid leak it eats up the paint wish I would I use something else------------------ what do you think ?

Looking for suggestions for paint on springs and front and rear axle on a early 30s plymouth was told to use rustolium

thanks

Do not know application please contact at bobnroman@yahoo.com

thank you so much for contact I do not know what some of the stuff is for got at auction I could do reserch but the person needing the part will know------------if not it will stay in my basement

Contact me at bobnroman@yahoo.com

please contact at bobnroman@yahoo.com

I have what I think is a 33 to 35 mopar winshild contact at bobnroman@yahoo.com

was told this is for late 30 Chrysler with swing out window good quality looks like Steel products----- please E mail direct bobnroman@yahoo.com

did you ever get the Temp gage ?

I have floor matts contact at bobnroman@yahoo.com