mikespeed35

Does anyone know of a 1910 Mitchell Model S engine or parts available? Thanks CORDially Mike Huffman

It was said earlier in this thread that "the Manual is a little off". Where is it off? I can't check the system if the vaccum lines aren't going as described in the manual. Yellow, White, etc. CORDially Mike

This thread is the exact information I was looking for on my 64. Thanks guys. Sometimes computors can be a blessing! CORDially Mike

Yes it is a Marmon 16 Dist. I have a 16 and am looking for a spare Dist. to carry when we tour. If you are interested in selling it please contact me at mikespeed35@yahoo.com or 616- 669- 0046. Mike Huffman

Thank you RivNut for your help. I was under the misconception that each rear cushion came out independently. Came out easily once I realized they came out together. I also used your suggestion on how to move the seats back. Thanks to everyone who responded. CORDiallyMike

It looks as though the center arm rest has to come out first. It is over the cushion and when I try to do as you describe the cushion lifts the bottom part of the arm rest? CORDiallyMike

I need to remove rear seat cushion to repair rear power window. My car has rear speaker and folding arm rest. Any tips on how to accomplish this. Power window motor works but has come off window track. Thanks for any help. CORDiallyMike

A friend of mine was on a tour and one car had trouble and my friend diagnosed a condenser. He happened to own a NAPA store but on the road had to shop at one of his competitors. He went in and told the young man he needed a condenser. The young man asked for the application and my friend said any cond. will work just get me one. The kid come back with a big box, air cond. condenser! CORDiallyMike

I will have Auburn, Cord, Corvette, 65 Chevy, 12 bolt posi. Small T-Bird soft top, Type 61 Cadillac 24 page sales manual, 1915 Overland manual and much more at GBG 20-24. Stop by and take a look. CORDiallyMike

This motor sold. Thank You. CORDiallyMike

Ford 351 Windsor. 1974. Turns free. I removed from van in 1981. Was a two barrel. NO carb, starter, or dist. $125. Call 616-669-0046. Located in MI. CORDiallyMike

1965 Chevy SS drive train for sale. Radiator to rear, air cleaner to oil pan. Also drive shaft and trans cross member. 327 300HP standard bore, Muncie 4 Sp. 12 bolt posi. I removed this myself in late 1970's. Has been in my garage ever since. Also have the Protect-o-Plate, owners manual, etc. Many other miss. parts as well. This is a late 1964 drive train. $1800. Might part out individual pieces if no interest in entire unit. Located in MI. Can call 616-669-0046 for casting numbers etc. CORDiallyMike

I don't like the idea of shipping my reflectors twice. Double the chances of loss and damage! Cordially Mike

Can anyone recommend someone to resilver headlight reflectors. Thanks Cordially Mike

Thank you all for the help. Cordially Mike

This body can be seen at the NATMUS Museum in Auburn IN. The NATMAS Museum is right behind the ACD Museum. Cordially Mike

I am trying to identify a dist. It is Delco Remy 1111202. It is either for a dual 6 or a V12 application. It will be in the late 40's or early 50's by the number sequence. Any help would be appreciated. Cordially Mike

Any interest in a 1990 Chrysler Imperial? CORDially Mike

Just to clear up the matter of the ACD web site. You do not have to be a member to post on the site but you do have to register. I also should mention that above the Dual Ratio casting mark between the two bolts you should find a stamping of the date of manufacture like 4x34, 5x35 which stands for month and year. The ring and pinion are usually not the problem. It is the planetary system. Removing the cover won't tell you the condition of that, only total disassembly. Cordially Mike

Auburn used Dual Ratio rear ends from 1932 thru 1936. There are several different ratios. If you go to the opposite side of the housing from where the vacuum canister is located between two housing bolts you will find a stamping in the housing that will tell you the rear ratio. Such as 51x10,43x10, etc. The lower numerically the better. Dual Ratio rears can be the weak point for these cars and often require repairs. Asking prices at Hershey are usually $1800. to $2000 and quite often go home with the seller. This is because of the unknown condition of the unit. Cordially Mike

I am looking for a oil filter canister for a Marmon 16. There is a booth at Hershey that sells repro. canisters with a modern replacable filter inside. Any one recall the machine shops name? CORDially Mike

I have a 1928 Oakland motor for sale. It turns free, has a standard bore, 3.250, and is complete. It needs to be rebuilt. The motor number is L193477 and is located in western Mi. You may call 616-669-0046 for more information or email Mikespeed35@yahoo.com CORDially Mike

These tires were three years old, the trailer axles have been aligned. This tire Co. has replaced the tires three times free. They have blown every time. I use load range E, the highest load range available. I will never us this brand again. The tires were warranted by the local tire Co. I will see what they do when I bring in the shreads! CORDially Mike

Another Flat tire near DesMoines caused us to stop for the night there. After the purchase of four new tires for the trailer, we were on the road again. We finally arrived home about 11PM. Does anyone have suggestions as to why tires with less than 8000 miles on them would blow? The trailer is not over loaded, has been balanced, and the trailer is usually stored inside.

We are on the road again!. The truck is fixed! We picked the truck up around 11 this morning, drove back to Gillette and picked up our trailer and finally got underway again. Around Sturgis, SD, we got the signal from a trucker that we had a flat tire on the trailer. Yes, that the second trailer tire this trip. It was 100 degrees outside and the sky was hazy and smelled of fire. We ended the day in Murdo, SD. </SPAN></SPAN>