Rocks Rod & Custom

Thank you for looking!

I am looking for the kickdown switch bracket for a 1965 model factory dual quad setup. I know there are reproductions available but I would prefer a factory bracket. Thank you Jason Rock

I highly doubt this is a 40,000 mile car. It has quite a few quirks if you look closely at the pics. That being said it will be interesting to watch this auction.

I own a set of the first wheels Joe had on that stage 1, he had them made a little wider. They are spyders with a little bit of curb rash from loaning the set to one of his buddies that wasn't very careful.

These are filter numbers for the pancake style air filter housings

I'm not sure what that measurement is, the pictures I posted were from several years ago. You might try asking this question on some of the Riviera pages on Facebook. Hope the pics helped.

Here are some pics of my 63 when I was repairing the rot.

They are not perfect but would look nice on a driver.

Hi Loren, I have a set of 14" wheels and skylark center caps. I'm located in north east Kansas. I can send pictures if you are interested.

Yes sir I still have a few. I don't have a lid for the chrome one in the picture.

The A85C has the proper lip for sealing at the top of the filter housing

I have a few of the pancake style air cleaners for a quadrajet and nos filters to complete the assemblies. I also have a few of the 1966 quadrajet intakes. Let me know if you are still looking for these parts.

Here are a few pictures of what I have.

Hi Pete, I have a choke housing from a 2bbl rochester setup on a 300. I recently purchased a collection of buick parts and I don't know the condition as far as leaking. If you still need one I can send you some pictures, it is still mounted on the engine. Thank You Jason Rock

Is there anybody on this forum that parts out the late model Riv specifically the 97-99 models. I am searching for the multifunction switch which has been discontinued from the dealer and there aren't any available aftermarket. Thank you. Jason Rock

It can be repaired, a competent welding shop should be able to weld it up no problem. When welding cast the whole part is heated up and then welded after the weld is completed it is put back on heat and very slowly cooled.

They are interchangeable.

Most of the cars went from 150 to 200 range mostly parts cars that were fairly complete. There were a couple gs cars in the mix and bought right.

Hi, Kreed painless wiring makes a great wrap called classic braid. Very easy to use and looks great.

I used the Cars kit, worked great. They can also taylor a kit for your specific needs.

If it is a factory Buick steering wheel it is not really wood, it is a plastic composite. You could epoxy it back together and sand it down then take it to a hydro graphics place and get it refinished.

Hi John, I have one that was removed from a running car about three years ago how does 25.00 plus shipping sound?

Hi Zimm, I have one that was removed from a running car about three years ago. If you are still looking for one message me for contact info.

Hi John I think I may have one, I will look through my stash of leftovers tomorrow and I will let you know.

Private message sent