Kirk

Afternoon all, I am trying to get the rear wheel/hub assembly off of my 1926 Paige Model 6-72. I need a hub puller. I can not do the rear wheel cylinders without the hubs off the car. The car has a Salisbury differential in it. Which I am not familiar with. Can I use an axle knocker? Some differentials you can not use a knocker. The Paige is not running so I can not go and do figure 8's with the axle nut loose. Any suggestions. Will someone loan me a puller? Kirk

The company we use here in Virginia is The Brillman Co. Phone 540 477 4112 or a Brillman.com His name is John. Does good mag work. Kirk

I would try Nelson Pease, Foundry St., Palmer, Mass. Phone # 413-283-7620. Best time to reach him is between 8 and 9 AM. Kirk

1940 Graham "Spirit of Motion" (aka sharknose) 4 dr. sedan. Needs restoration. Complete car missing the air cleaner and 1 SUPERCHARGER emblem. Has supercharger, rebuilt driveshaft, radio, heater, all hub caps, owners manual, and all the history of this car. Lots of NOS parts. Remember that '40 was a short production year with only 514 cars built prior to the Hollywood. $5,500.00 Eric at ek52hudson@yahoo.com Located in Northern Virginia.

For Sale: 1912 Reo the Fifth manual $45, 1913 Overland Model 79 manual $45, 1933 Stutz l Safety Stutz SV-16 and DV-32 a contribution to Humanity manual $100, 1951 Nash manual $12, 1950 Chevrolet manual $12, 1957 Ford manual $15, 1959 Rambler American manual $12, 1966 Pontiac or Tempest manual $22, 1950 Buick manual complete with radio manual, dynaflo manuel-2 types and folder for all $30. Plus shipping-Eric Kirk ek52hudson@yahoo.com

For Sale: Rear center section of bumper for '58 Chevrolet. It is NOS but shop worn and some rust on the inside. Great for HPOF car upgrade. $100 +shipping, in VA. Eric Kirk, email 52hudson@yahoo.com

If you haven't located you ignition parts for your Hollywood call Nelson Pease, Foundry St., Palmer, Mass. Phone # 413-283-7620. FYI try replacing the coil, usually works for me. If you have spark at the plug tip and an arc when you manually break the points, its not the coil. If you have spark at only one of these places, say plugs, its the old wires, If not spark at the points it is either the point set, condenser, or coil. Eric Kirk

I just bought an NOS carburetor from Nelson Pease, Foundry St., Palmer, Mass. phone # 413-283-7620. Best time to reach him is between 8:00AM an d9:00AM Monday to Friday. Also just got a tune kit for the same car and a NOS distributor. He may have more, maybe not, but worth a shot. Eric Kirk

I have been requested by the Graham Owners Club International (specifically the Michelhaugh family) with the daunting task of coming up with a list of Paige-Detroit and Paige built cars from 1909 to 1927 and their current owners. After all these years, the powers that be have decided to seek out Paige owners for membership in the Graham Club. I was the first person to take a Paige, a 1926 Paige 4 dr. Model 6-72, to a National GOC Meet in Williamsburg, VA in 1989. They had made no expanded judging or space for a Paige automobile at that time. To say the least I was shock and much displeased. Now after 27 years, and a re-upped member of GOC and also a Graham owner, I have agreed to take on this task, plus be an advisor on things Paige, even though I am only knowledgeable on 1925 to 27 Paige cars. What we are seeking is a list of cars and owners and addresses in an effort to expand the GOC membership and welcome Paige owners. Thanks in advance for any help I can get in this matter. I think that we all shall benefit from it. The GOC National Meet #46 is in Chattanooga, TN on June 21-25 at the Choo-Choo Hotel. Email me for details on the meet and your information on Paige cars. Thanks again, Eric Kirk, Winchester, VA AACA member since 1974.

ok I will see if I can pull up the pics of the part. Yes, any spare parts would be considered even though I have a perfect grill and 3 parts and the stainless too.

Dave, Let me know a price please. Even though I have a hood mechanism I probably will never have enough Graham parts. I am in Winchester,and it looks like you are in northernva so I may be close to you. Eric Kirk ek52hudson@yahoo.com

A radiator for a 40 sharknose and headlight buckets needed