Jump to content

Ric Dean

Members
  • Posts

    320
  • Joined

  • Last visited

Everything posted by Ric Dean

  1. For sale New Old Stock, from old GM Dealership (Dark Blue Dab Marker) (Metal Band Part Number Tag 605937) overall Length 33”. 1939 Chevrolet Series JA Master Deluxe Front Axle Tie Rod. $60. + shipping
  2. … Here is a side view Taillights 1936 Chrysler to the left 36 Dodge center and 37 Packard on the right side. Thank you dr watson
  3. Thanks Professor, Could have come from that same early Dodge with the Radiator Valance you helped me with.
  4. I.D. needed 1920s? Windshield Posts or Stanchions are 2 foot high from Cowl. I took these off the Junkyard Touring Car myself in the 50s, but can’t remember anything about it other than it being wadded-up as you can see by the one bent Post. Thank you AACA and members for your help, Ric
  5. still need information on these. thanks Ric
  6. Wow that sounds like a special Car, Graham 1935 Model 73 / 75 Blue Streak Coupe or Convertible. I found a Graham Hubcap in the shed now I have to find a (3¾ inch) Red Lens to help display this Graham unit. Thank you this was a tremendous help.
  7. I should have noted its size, I would put it on the small size and not for oil use. Overall length is 15’’ and only about 1 3/8’’diameter. Smells like It’s past use was for graphite grease.
  8. What Teens or 1920s Touring Cars had Door Tops like this? It came from the middle of the Nevada Desert back in the mid 50s, metal was hard to come by back then,🤠 nuff said?
  9. Check with local Watch or Clock Repair places. If you can find someone that is congenial they can help lead you in the right direction without the shipping hassel, It has worked for me.
  10. I.D. needed for New Old Stock Connecting Link, Pre 1960s? from old GM Dealership (Metal Band Part Number 605937) (Dk Blue Dab Marker) overall Length 33”. This Site is a great avenue for this experience, Thank you AACA for your help, Ric
  11. But you will have good wall hanger there. 🙂
  12. I.D. needed- Brass Grease Gun dated Jan 24 1911 by John Dickens, has a Ball Turret Tip Automotive? This is a wonderful avenue for this experience, Thank you all for your help, Ric
  13. Right-on’sagefind’ can’t get better then this shot, thanks for your help. Ric 1933 Graham Blue Streak
  14. I.D. received: 1935 Graham Blue Streak Taillight Body / I.D. needed Taillight Body, 1930s? must be off a big Car weighs about 6 lbs the whole body is a casting no stamped sections except the Lic plate frame, Has anybody ever seen this design before? I Have found this Lens design attachment on Chrysler and Packard Prods but not with a lens this big (3 ¾’’). It has High-end Encase, System that molds in the Bezel. The missing Lens would fit inside place with 3 inside spanning springs (included). Thank you for your input
  15. Thank you for the details. Ric Dean
  16. Where on the Model A Car were these used? Sorry not familiar with Model A's. thank you
  17. I.D. solved Model A Ford Cable, Conduit with Wiring and Contacts assembly, they are in good condition, but not the switch as you can see. This has been hanging on the Shop Wall for over 66 years. .... more information, overall length 33 inches
  18. This was 60 yrs ago but I remember the DB Body had a 1917 Serial number on it, under the front seat? thanks for the help
×
×
  • Create New...