49cadde

Complete less oil lines-has spring inside-mounts to the radiator hose neck $35 plus priority shipping from calif. Jeff cadillac lasalle club

Thermostat housing #/canister bracket should tell the application (?) but came with a load of 41 heads/blocks from a friends stash all sold less canister. 49-53....I don't know being a 49 cad buff.

Complete with good thermostat neck #1340855 $60 plus priority mail $13 in the USA. Jeff cad/lasalle club 85-14

Complete with good thermostat neck #1340855 $60 plus priority mail $13 in the USA. Jeff cad/lasalle club 85-14

Nice oem drivers condition with medallions http://forums.cadillaclasalleclub.org/index.php?topic=122279.0 Ships from Patterson, Calif 95363 Cad Lasalle Club 4194

Rare item which I don't have.

2 or 4 door items ?

Need both sides. Jeff CLC

Made by the Fitzgerald MFG. Company Torrington, Conn Part # MS6035 . You can't buy quality gaskets like these anymore. $20 shipped in the USA. Email me direct for pictures.

Posting for a 49er friend. 1959 390 Cadillac, completely rebuilt 8K engine- Removed from a running show quality Coupe DeVille to receive a 501 Caddy. Cost just under 5K to rebuild in 2008- $2500.00 - Can freight ship from Zip 33810 at buyer expense- Call David @ 863-6600758 EST Central Florida. dhutch4@yahoo.com

Posting for a 49er friend in Florida. Have (2) late 40's Cadillac side loader transmissions (includes rare mainshaft collar) $500.00 each- Also, (2) correct Cad Hurst floor shift units, $250.00 each. (3) '49- 54 GM Standard Cad bell housings (one will also fit '49-53 Olds rear engine mount set up) $100.00 each- (2) GM '49-'54 Cad/Olds standard flywheels $100.00 each- Also an aluminum Schaffer '49-'54 Cad/Olds flywheel $180.00- One clutch housing plate and Cad/Olds disc $50.00- I standard clutch fork and bearing $50.00- (1) Early 50's polished Weiand 3 carburetor, Cad '49-'62 intake manifold, with 3 matching, rebuilt Stromberg 48 carburetors $1000.00- Original 50's aluminum Hildebrandt high lift "bubble" '49-'62, Cad rocker covers (they are not reproduction and are excellent) $800.00- New complete Bendtsen '55-'62 Cad transmission adapter kit for all GM 350, 400, as well as the overdrive units including the 700-R; includes high torque starter/flywheel and all parts. $600.00. Will consider offers to combine components. Call David @ 863-6600758 EST Central Florida. dhutch4@yahoo.com

I have a buddy with a solid/straight 41 buick coupe-body is in red primer-interior redone here in calif. Email me direct 49cadde@gmail.com for pic's. Jeff cad lasalle club 1985-2011

Exact reproduction of the brass bushings that are a "must have" to seal the main fuel line into the tank inlet fitting. $30 shipped. Email me direct for a picture and ordering.

<TABLE width="100%" border=0><TBODY><TR><TD vAlign=center>Posting for a friend</TD><TD vAlign=center> </TD><TD style="FONT-SIZE: smaller" vAlign=bottom noWrap align=right height=20> </TD></TR></TBODY></TABLE> <HR class=hrcolor width="100%" SIZE=1>EXTERIOR Hood center molding (Also the flying lady parks her lower end in it) Turn signal chrome bezel ring about 4 inches in diameter. (Yes it is round) Raised wings Cadillac hood emblem for front of hood "C A D I L L A C" front of hood lettering (8 holes in hood to affix it) Left bumper guard 2 each headlight doors (Rims) paintable. 2 each rectangular (about 5 x 8 inches) fog light lenses 2 each rear bumper guards 1 each right tail fin (upper portion of tail light ) 1 back up light assembly Tail light base assembly (mid section) Chrome cover for combination trunk handle and license plate holder (the part that encloses the light lens) One pair of correct mirrors (what ever that means) One exterior door handle with retainer One pair stone guards or where can I get new rubber put on mine One pair of fender skirts or rebuildable ones 5 each 16 inch correct wheels (16" x 6" from 1939 and 1947) 4 each rebuildable hub caps Rear valance ( I have one in very poor condition and would be easier to find a good one?) Ends and center for front bumper Valance INTERIOR Turn signal lever (stalk?) Ivory shift lever knob (standard transmission) 2 rebuildable sun visors Left half of windshield molding with joiner pieces Parking brake handle Rebuildable steering wheel (mine is down to the metal) 4 (one set) interior door panels 1 interior door handle Left rear door window molding One short (22 1/2 inch) foot rest for rear seat, foldable and 6 screws (3 each but I have one with out fasteners and not sure what I need one would help to get the right ones?) 2 air grilles for under seat heater that heats rear of cabin. One set of 4 running board covers (or where can I get mine reconditioned?) 4 lock knobs (The ones you screw on the lock extension and pull on to unlock it) Carter carburetor part of the automatic choke (The arm that sticks out and engages the spring in the choke) Please reply to Gary Griffin glgriffco@msn.com http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270665224214&ru=http://motors.search-desc.ebay.com:80/270665224214_eBay-Motors_W0QQcatrefZC5QQdfspZ1QQfromZR7QQfrppZ200QQfsooZ1QQfsopZ1QQftsZ2QQpfidZ0QQsacatZ6000QQsofocusZbsQQfviZ1

Directly under the steering column where it enters through the firewall. It's bolted to the frame.