Superjustin13

Members
  • Content Count

    39
  • Joined

  • Last visited

Community Reputation

11 Good

About Superjustin13

  • Rank
    Member
  • Birthday 04/08/1989
  1. This came out of my 47 windsor, its stamped Nov 20th 1947 Its also stamped on top Battery- 6V Source probably off the ignition with a fuse correct? I have a bigger bullet connector off the ignition that is just hanging with no fuse in it. Im assuming its for the radio? Ground- Obvious, but in the picture should it be connected to the ground? VC- Wouldn't this be the Speaker? S Field- Speaker aswell, but when i pulled the radio the bullet connector thats grounded was already connected to it. Im assuming that's probably wrong? I have 2 bullet connectors coming off my speaker, so im assuming both of those go into the VC/S field , or would it be VC and ground?
  2. As the title says, not looking for Cylinder type, looking for the box Signal stat type. The one i have is a R421 which i can't find any information on it. so a 181?
  3. This is the Smaller type ignition switch that ends up going into the switch that uses HURD. Hurd 88-162 Heres pictures. I sell a lot on Thirdgen.org username is Superjustin13 thanks thanks Paypal Only. 30 shipped. original C38 1946-1947-1948 Chrysler Mopar Fluid drive brake light. The lens has a few chips in the top of it ( see picture ) and it has some Flaking and putting ( see pictures ) on the bezel, But it would make a decent driver. I think you'd be able to get this restored. Its a good piece if yours is broken or missing. I see no cracks in it. There studs are also in very good condition. 33 shipped.
  4. original C38 1946-1947-1948 Chrysler Mopar Fluid drive brake light. The lens has a few chips in the top of it ( see picture ) and it has some Flaking and putting ( see pictures ) on the bezel, But it would make a decent driver. I think you'd be able to get this restored. Its a good piece if yours is broken or missing. I see no cracks in it. There studs are also in very good condition. 33 shipped.
  5. Looking for blown up pictures of the Philco 802 Radio Schematics and tube schematic thanks C4608-122 Is the radio tag code I can see some online but now big blown up ones, unless they want me to purchase them
  6. as the title says, it should look like Sorry about the super tiny pictures. its part number 898504 Thanks
  7. paint code 7 is Dove Gray. code 23 for interior is Highlander interior Red Plaid and Red leather. 3825 is a C38 6 Cylinder Car/ 4 door car.
  8. Are you from oregon? I believe i saw that car on CL in Oregon or the NW region a while ago. He also had a limo?
  9. Comes with three different keys. 41 42 46 Plymouth Dodge DeSoto Chrysler NOS MoPar LOCK - eBay (item 140115005912 end time Dec-14-10 20:28:16 PST) theres the glove box keys. and heres the ignition/doors and the trunks a seperate key. NOS Mopar Dodge Plymouth Chrysler DPCD Keys 37-46 47 48: eBay Motors (item 350391513068 end time Dec-05-10 04:41:05 PST) OEM Keys are DPCD Aluminum keys.
  10. Okay, so the OEM Trunk and ignition/door keys are ALUMINUM DPCD keys. My question is, was the GLOVEBOX key also OEM Aluminum? or Nickle? and does Anyone know where i can find a OEM glovebox key so i can have one cut for my lock. Thanks. Im not interested in any other company who makes the keys, i want 110% Oem. no aftermarket brands or material.
  11. I have found a NOS one for 40$, I just dont want to buy one for that much. I know that's nothing but i'd rather get a used one and have it re chromed, as i'd rather have a used one in my car until i restored it.