• Content Count

  • Joined

  • Last visited

Everything posted by kdancy

  1. I have an nos 1951 Hudson ivory steering wheel. It smells so bad one can hardly stand it. Dont know what type of plastic it is made of. I'm wondering if I can safely scuff and clear coat with urethane clear to "lock" the smell in ?
  2. I'm working on a couple of stepdown Hudson's, a 51 and 52. There is a signal light/jewel that is in the left side of the dash. It is very small. Does anyone know of a casting company that would re-cast the little red jewel? This would be the little red opalescent plastic part that mounts in the small holder.
  3. Rally America wheels is now run by the original owners son, Jimmy. I had them make from scratch a set of wire wheels for a customer's 57 Golden Hawk. Within the first year rust started on them. I called to see if something could be done and nothing. Now about 3 years later, while doing some work with it on a lift, I noticed some of the welds on the inner hub were not properly welded and were starting to separate in a few areas on all but one rim. Shipped them back to RallyAmerica in October 2018 I just now got them back. March 15, 2019. Same issue with the welds, welds are too cold and not "dug in" to the base metal in all areas. Based on this experience, I can not recommend this company as the weld issue is a safety issue. I so much wanted to do business with them and am disappointed in the outcome.
  4. I called several times and get a message that it has been disconnected.
  5. Does anyone know if they are still in business? I had them re-plate some really rough Hudson bumpers in 2016 and they did a great job at a reasonable price. Their website is down and their contact numbers are disconnected.
  6. There were a whole row of 10 or so right next to the corvette area on the west side. At 10:00 am Saturday they were filled to the brim. Anyway, the meet was enjoyable. Only saw one Hudson, a 53 Hornet sedan. I have a 52 Wasp sedan on the rotisserie in my shop and am doing work on a 51 Pacemaker now. Just finished installing a wire harness in a 57 Studebaker Golden Hawk for a 92 year old friend.
  7. Colorbond paint https://www.colorbondpaint.com/pages/paint-selector
  8. Didn't have anything to show and wife and I went saturday as spectators. Great place for the meet! Parking was handled professionally, great job. Very much enjoyed looking at the cars/trucks/motorcycles and talking with their owners. Porta potties sucked.
  9. Anyone have a place you send and recommend for stewart warner gas guages rebuilding/restoring? Studebaker Hawk guages from 57-61
  10. Anybody want the rest of the parts? How about 50.00 and shipping for all.
  11. Apparently, they are for a mid 20's Essex. Just shipped them out to Hans.
  12. Thanks everyone! I just want to get the items into hands of someone that can use them. I'm not a dealer.
  13. I obtained these when I helped with an estate that was getting rid of Hudson parts. I've already seen that the Hudson stuff went to a good home. The fellow also had some GM parts and this hood ornament was among them. I think maybe late 30's Pontiac ?
  14. https://www.usnews.com/news/best-states/california/articles/2019-02-04/tesla-buys-battery-technology-company I don't think Tesla is going away -- interesting battery tech https://www.youtube.com/watch?v=t-vons7xbdo Battery Technology advancing rapidly https://www.forbes.com/sites/forbestechcouncil/2018/07/09/seven-ways-advancements-in-technology-will-change-the-near-future/#31a52b2c268d
  15. Chistech, I tried calling and then sent them an e-mail. Thanks!
  16. Could not get a reply back from them. I had LarkWorks build the harness. Installing it now.
  17. Any recommendations? Williamsons used to do it but according to a Studebaker vendor I just talked with, they no longer do the SW gauges.
  18. I just called RIWire and was told that the owner of Narragansett passed away a few weeks ago. His son is now running the business. Looks like we will have to put a stop on payment and order from someone else. RI wiring can't build the harness we need for a 57 Studebaker GH. Lark Works specializes in Studebaker Harnesses so I'll give them a shout.
  19. I can not get anyone on the phone (after multiple calls) and can not get their website mail to work.
  20. 35.00 plus shipping should be fair. I don't need them.
  21. I found these items in a box that was marked Hudson. Obviously it is for a Buick, 1939 I think. Looks like a deck lid emblem assembly. Make offer plus shipping priority mail.
  22. You would have to also change the flywheel for a dry clutch to work, the oil clutch flywheels are very thin to dissipate heat. They were and are very good clutches but you do need to check and change the oil every few years. Hudson vendors carry the oil as well as the club store. Many owners use type F automatic transmission fluid. It only takes a few ounces.
  23. This is located in Jacksonville Fla. The owner passed away and parts will go to the scrap yard if not sold. The owner had a couple of pre-war buicks and bought this just in case he ever needed another motor. This engine was bought as a running motor, I was told. It has been stored inside on an engine roller. Ralph Lake is the contact person. (904) 434-7378
  24. 1937 Hudson Terraplane pickup for sale ---- This PU was pictured in the Nov/Dec 2014 issue of the WTN. Several years were spent restoring it from one end to the other. The owner has been diagnosed with stage 4 cancer, and would like to see someone else purchase it that would appreciate this restored Hudson. Diane is asking $55,000.00 or best offer. Color is not original but the rest is. The truck is located in 7903 NW 74th Ter , Tamarac, Fl 33321-4817 near Fort Lauderdale Florida Diane Frock 954-695-6814 http://s294.photobucket.com/user/studebaker2/library/1937%20Hudson%20Terraplane%20Restoration?sort=6&page=5 http://s294.photobucket.com/user/studebaker2/library/37%20Terraplane%20PU%20cab%20work?sort=3&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Hudson%20Terraplane%20PU?sort=6&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Hudson%20Terraplane%20PU/PU%20progress?sort=3&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Hudson%20Terraplane%20sidemount?sort=3&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Terraplane%20Bed%20-%20construction?sort=6&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Terraplane%20engine?sort=6&page=1 http://s294.photobucket.com/user/studebaker2/library/37%20Terraplane%20Transmission?sort=3&page=1