Jump to content

Robert McNeil

Members
  • Content Count

    136
  • Joined

  • Last visited

Everything posted by Robert McNeil

  1. For Sale have 6 or more 1933 Packard 8 Wire wheels, 6 by 6 bolt pattern, 17 by 4 5/8 heavy duty, painted $130 each Bob McNeil at 303 795 0203 Colorado
  2. Hello I have For Sale, a set of four, three excellent, one solid but pitted 17 by 4 Wire Wheels for Packards from 1932 to 1936. These are 6 hole on 6 inch circle bolt pattern, heavy duty wire wheels made by Motor Wheel Co, These are 40 spoke wires with a 4.5 inch center hole and hub cap opening is 6.5 inches. Asking $900 for the set of 4, plus shipping. Phone is 303 795 0203 in Colorado or bbhmcneil@msn.com Thanks.
  3. Hello Looking for a Original, good column shift transmission, linkage, and steering column for a 39 4 Dr Convertible. also any extra top irons or parts that aren/t damaged. Phone is 303 795 0203, or email bbhmcneil@msn.com Thanks.
  4. Hello I have a 1936 Dodge Hood, 4 peice, straight except right top is folded. No 2 Hood, bare metal, has all handles hinge works but needs to be replaced=chrome peeling. This is the only 35-36 hood I found in 15 years. Willl sell this and other 36 parts; don't have a door, but latches, handles, window reg, Window garnishes left front and right front. Thanks Bob 303 795 0203 or bbhmcneil@msn.com
  5. Hello Someone contacted me in thse last two months, asking about the Rear Fenders. I thought they were gone, but found them in the storage shed last week, kept dry from the rain. They are still very good condition, still: For Sale. $400 for the pair, plus shipping. Thanks, Robert bbhmcneil@msn.com or 303 795 0203 in Colorado.
  6. I have an extra 1927-1928 -1929-1930 Rumble Lid, Steel that I saved from the wrecking Yard, don't know the make yet. Very solid, has been in my basement for 20 years. It measures 25 by 40 inches, has the heavy steel plate hinge brackets attached. The hinge plates are 37 3/4 inch apart. Also has the twin holes (handles?) or luggage trim at 34 inch apart. I suspect the inside stamping pattern will help identify this. Please let me know if you recognize this. bbhmcneil@msn.com or 303 795 0203 in Colorado. Thanks
  7. Surplus from my parts pile is a 1936 Chrysler Airstream Shell for Radiator surround and grille. This steel unit is all original, straight, no repairs no cracks no rust. All bolt holes for grille are in excellent shape, fender mounting holes likewise. .Removed from an undamaged car long ago. Asking $400 plus shipping from Colorado. bbhmcneil@msn.com or 303 795 0203 day and evenings. Thanks.
  8. Hi everyone. I have a 1928 style Plymouth Hood with the 3 inch square cut out just behind the radiator cap. This hood measures 34 inches long down the side hinge,and 30 along the center hinge, less the cutout Some cream primer has been sprayed along the joints to show the shape. Hinges work easily, panels are flat on the side, and correctly curved down the sides on the top rear. No cracks that I can find, no bullet holes, no dents, Fins are all good -22 each side. Would like to find a good home for this hood. From eastern Colorado sand hills. Asking $325.00 plus shipping. email is bb
  9. Finally have identified these 2 old stock T28600 and 601 castings as 1932 Buick, not 31 LaSalle as I earlier thought. They are different lengths, but consecutive numbers. Came from Arizona desert outside storage, excellent threads on studs, original chrome is peeled away, and most of the casting surface is exposed without the pitting from a wet climate. they are crack free, and not abused, laying in the sun all those years. Asking $325 for the pair, plus $12.65 postage. EARLY TAKEOFFS. Robert McNeil at bbhmcneil@msn or phone 303 795 0203 in Colorado
  10. For Sale: a matching Pair of chrome Depress Beam, 1929 Model 75 Chrysler, possibly others, Head Lights, with large 1 inch bottom post. These come complete with glass, reflectors, bezels, latch peices. They have the nice brass Chrysler emblem at top. Driver quality, with a few very small dents and scratches, need rechroming for show. Two radial cracks at base of one bucket, bezels are not clamped down in photos. Asking $375 for the pair, bbhmcneil@msn.com, or 303 795 0203 in Colorado
  11. Hello Since I am unable to edit the original post, I will add a few comments. 1929 Chrysler 75 certainly seems to be main use all right, but several other candidates, like model 65, and some of the 1930 Chryslers used bowl shaped lights, but I am not sure the bases were the same. I am changing the asking price to $375, and also posting elsewhere Thanks
  12. Have left from a 1931 Chrysler CM-6 , a Folding Luggage Rack. This is 33 inches wide, 12 inches long, has 12 holes in the pattern. This very light, and folds up to 6 by 6 by 33. The bolt feet are 7.5 inches long, on 24 inch centers to fit frame support. Has one small dent in the margin to fix. Painted a deep copper color. Weighs 13 lbs, hinges work smoothly, don't see any number or name on it. Asking $ 225.00 plus shipping by fed ex. bbhmcneil@msn.com or 303 795 0203 phone in Colorado Robert McNeil
  13. For Sale: Pair of 1930 Chrysler Headligths Bowl Shaped, 11 inch diameter by 6.5 inches deep. Made by Depress Beam (CM Hall) came on several models, I think Chrysler 72 and75, maybe others. This pair is complete with posts, bezels, bezel locks. lenses, correct Chrysler emblem at top. Large one inch, bottom post at base. Driver quality plus, one small dent and two scratches on one, need rechroming for show. Two radial cracks on other bucket, 1 inch long. Bezels are not clamped down in the photos. Asking $400 for the pair. bbhmcneil@msn.com or 303 795 0203 in Colorado. Robert McNeil
  14. Hello I think it is 1928 or 1929, by the door side molding, and square top.. Not DA or Victory Six, slightly earlier.
  15. For Sale: I have sold my early 30's Dodges, but still have safely in the basement, in original black paint with steering wheel, a 1930 DD6 Steering column, great rubber wheel, no dents in tube, has horn button, goes down to bottom wear wires and rods connect to steering box. Asking $175 plus shpping. bbhmcneil@msn.com, or 303 795 0203. Thanks.
  16. For Sale: A Pair of 1932 Dodge Front Spindles, bare, in very good condition, minor flaws, but No unusual wear or scratches. No casting numbers visible, 6 inches long from the bolt plate. $125. Pair. Also have a matching pair of Cowl Vent Doors and mechanisms, I have oiled them up and both work fine. $75. for both plus shipping. These need a new home, I never found a 32 Dodge to build or restore. bbhmcneil@msn.com, or phone 303 795 0203 in Colorado. Thanks.
  17. Thinning out my collection of unused parts: Have two 1931 gas tank covers, or tailpans, fit DeSoto and Chrysler 6 cyl cars of that year. The less expensive tailpan has been repaired at the front edge under the body. All is nice and straight now, no rust no cracks no dents, some original paint. Asking $175 plus shipping. Pictures of this one shown here. Robert McNeil: bbhmcneil@msn.com or 303 795 0203 Thanks.
  18. Hello Finally decided to clean up the garage, have this 1931 Olds Original head Light Twin bar with Nickel? plated mounts that I am going to sell. Bar has nice workable bolts for each end where it meets fenders, light mountings have not been unclamped,clean bolts, but car was inside for most of its life, and these will come apart easily. Bar will need rechroming, and mounts too. Very straight. $250 plus shipping Bob McNeil in Colorado 303 795 0203.
  19. The only part of a Nash 8 cylinder engine I was able to save is this Valve Cover, in good western weather condtion. I had cleaned the dirt and paint remnants off and stored it away. It is 33 inches long and 5.1/2 inches wide at the base; 4 hold down studs. Asking $75.00 plus shipping from Colorado. Bob McNeil 303 795 0203, or bbhmcneil@msn.com Thanks
  20. Hello yes the Dodge light bodies are much bigger and longer. more pointed at tail end, 1/4 inch larger I think. Bob
  21. Not going to build a 32 Chrysler after all, so I am selling these Pair of Steel Matching Mounts for headlights, that go between the fender and the grille shell. These are each about 12 inches long, with fender bolts at 2.75 spacing, and a 1.25 to 2 inch round socket for the Headlight buckets posts to mount in. These are nice smooth castings, most of the chrome has peeled as there was no copper underneath, but could be polished up and rechromed, there is No pitting like on zinc castings. Pinch bolt fitting on the inside end of each one, where it fits with a cross bar in the shell. These are h
  22. Hello I have a set of Four: 14 by 6 Steel 1972-1974 Dodge Road Wheels, like Magnum 500, with chrome centers and black painted rims. These are Factory equipment, all stamped 3580065, no dents only minor very thin surface rust on inside in spots; will need to be bead blasted and repainted. Originally came with center caps and chrome edge trim rings. I have 3 used center caps included in set. Price is $375 for set of 4, plus shipping. Inquiries to bbhmcneil@msn.com, or 303 795 0203 in Colo. I have a few extras if you need 5
  23. Extra parts from storage, a mostly complete set of 1942 to 48 Chrysler Convertible Top Bows, 17 peices, looks like 3 missing. All of these are steel, paint covered, have been in inside storage for years. No apparent damage. Two cross bows, one large base peice, many others, see photos. Don't know if these will fit Dodge or Plymouth for same years. Asking $750 for the set, call or email for more details Robert McNeil in Colorado 303 795 0203, or bbhmcneil@msn.com
  24. Still have this nice pair, plus a third wheel as spare. Very solid Thanks
  25. Hello Bob I have the front half of a 1930 Dodge DC-8 frame, cut at the back of the X junction. Bob McNeil 303 795 0203
×
×
  • Create New...