Loren@65GS.com

You most likely will get quicker answers at 65GS.com website. Loren@65GS.com

Interested, message sent. Loren@65GS.com

For Sale Buick fuel tank door guard. Group #: 8.210 P/N: 980208. I was not able to confirm the application in my parts book. Possibly 1961 models 4000-4100. $15 plus shipping in lower 48 states only Thanks for looking, Loren@65GS.com

For Sale SOLD This is the cover for "Buick Gran Sport Options" dealer flip chart literature piece. It is in very good condition but is missing the closure tab and the literature. In short, it is just the cover. The material in the open picture are copies of the original and are only of the Skylark Gran Sport. There is supposed to be material regarding the Riviera Gran Sport also. $75 plus shipping in lower 48 states only Selling for a friend, Loren@65GS.com

For Sale Hood ornament for 1965 Skylark. I consider it driver in condition. Outer edge has pitting at bottom near the base. Inside ring area has pitting. There are marks on front and back edges and is bent back slightly. Colors are faded front and back with the blue area on back side having been touched up. $160 shipped, lower 48 states only. Selling for a friend, Loren@65GS.com

One pair left. Thanks for looking. Loren@65GS.com

In order to remove the trim piece that you are referring to, the wind wing assembly must be removed to access a screw near the front of the molding. Loren@65GS.com

email sent

Looking like it could become an interesting endeavor. Loren@65GS.com

Jim, I got pictures of the wheels, fourteen pictures in total. A lot to post to this thread. I can email them to you. They are 14 X 6 and all the same code, which is "JJ, 991". The back space is 3-1/2" according to the chart at Team Buick. My opinion is they are in overall excellent condition. One has an extremely tiny nick at the outer front edge. To me, the spot looks like it could have been made by the installation of a wheel weight. I have a picture of it. The back side in the spoke area of all four have light rust.

I will do that.

Thanks Tom, I thought so but wanted to hear from someone with much more Riveria knowledge. Loren@65GS.com

Where is this located? Loren@65GS.com

I'm going to get in line. Loren@65GS.com

This may be a silly question to most of you but would I need this drive shaft in order to change out the Dynaflow in our '63 Riviera to a '65-'66 400? Loren@65GS.com

Planning to head down to my friend's place and get pictures this Friday. Loren@65GS.com

For Sale 1 NOS interior door handle for 1960 Buick all except 4411. $15 plus shipping lower 48 states only Thank you for looking, Loren@65GS.com

I had a full-size Blazer back in the 80's that the differential was serviced on by the dealer. It took two of the GM additives to quiet it down. On another vehicle, a Ford one ton, the dealer didn't have the correct additive in stock. They used something from an auto parts store. That caused a noise issue. From my experience, I feel it's important to use the correct manufacturer product. Loren@65GS.com

I will do that. In fact, I will take care of it asap before it escapes me. Loren@65GS.com

Jim, I have a friend that has a set of 14" Buick rally/sport wheels. They are about 2 1/2 hours away though, so I'm not able to get pictures. I'd ask her to, but they are up in the garage attic, and it has been unbelievably hot here in the Midwest. As I recall, they were in pretty nice condition. If you are interested, I can contact her about them. Loren@65GS.com

Still looking for these items. '64 and '65 interchange.

Hard to believe too

refreshing to the top

Above is a chart of the Rally wheels Buick used. As you can see, the 14" wheels are all 6" wide but different offsets or back space as it is referred to in this chart. The first and second designs will not work with disc brakes because of the back space. The 14" seem to be more easily found than the 15". At least that is my experience. Hope this is helpful and good luck, Loren@65GS.com