Heres what I did after following Steelmans great I used 1/8x1in metal for top and bottom had to bend both to keep lights straight Attached a strap in back to stiffen lights
was going to use wire from light and resistor now on terminal 4 of voltage regulator and connect to #1 of new 2or 3 wire alt.and then connect #2 .and back screw on new alt.to bat. and disconnect rest of wiring neatly .What do you think?
want to replace old alt/reg. with new alt. with internal regulator and keep charging light on my 63 riv non ac car did this years ago on a 66 impala with a one wire alt but forgot how I wired to keep charging light any help to make this easy thanks
got motor working, have one broken cable, horizontal actuator is stripped, everything is worn have seat out reupholstered it, looks great want to drive car .
want to convert my 63 Riviera drivers seat from power [too many issues] to manual. Can I use a set of manual rails and bolt them to seat frame.Where might I get them and what years can I use. Thanks
I have my front seats out of my 63 Riviera ,drivers power seat worked but would get stuck.I want to repair/rebuild seat what do I do and does anyone have wiring diagram so I check it while it out of car.Thanks