riv1964

Looking for some help Does anyone have pictures, or documentation on how the 63 /63/65 front fender wells attach to the body / frame? Thought I took pictures of when I removed them 3 years ago, but alas, no can find.. Thanks! Roger

Need some help, Looking for a measurement for my 1964 Riviera. Front of frame to centerline of front wheels. I have the 1964 Frame data by George W Liskey for the Riviera, but doesn't show this dimension Thanks Roger

Been running 3.9 posi gears for a few years in my 64 Riv, great around town. The 64 posi center section is different from the 65. I currently have the 64 TH Trans, a 200-4R built to hold up to the torque and weight of a Riv would be great.. Roger

Nice Weld! Roger

Can't wait till Summer, so i can do it again :> Roger:D

Brown and egg shell gold Roger

I'm running 16's but I would think the issue would be total total tire height and width, not the rim size. My exhaust (headers) exit before the rear tires, but I also had them exit the rear at one time. Roger

http://forums.aaca.org/f177/can-i-see-64-riv-aftermarket-271141.html Link discussing wheel options for 1st gen Rivieras

I have rebuilt these posi's in the past. Made my own puller using a 1" Craftman socket, with 2 holes drilled Roger

Try this link for info http://forums.aaca.org/f177/can-i-see-64-riv-aftermarket-271141.html Roger

Keith Here is a link to my 64 with Boyds I did have to modify the backing plates slightly Roger

CC's on Nailhead Combustion chambers: varied between 125-127cc Mine with a "clean up mill" are at 123-124 Roger

My Flowcooler measures 1.25 and 3 5/8 Roger