Jump to content

BarelyFit

Members
  • Posts

    160
  • Joined

  • Last visited

About BarelyFit

  • Birthday 10/08/1951

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

BarelyFit's Achievements

500+ Points

500+ Points (2/7)

  • Collaborator

Recent Badges

0

Reputation

  1. The temp gauge fluctuations are NORMAL. I know it is not like other cars you've driven but the TC is not like other cars you have driven. Be at peace my brother.
  2. This is some advise Hemi gave me some years ago: It is true that mechanics don't want to do just boots any more. The reasons are many, 1- They don't know how, 2- They make more money selling you the complete shaft, 3- They are not responsible for any subsequent boot failure, 4- They can't find the correct boot for the application, especially a TC. It would be my personal advice to you to just get the whole shaft as your problems later would be fewer. Order 1- NCV12539 Axle Shaft.
  3. to attach the hook and loop to the metal, I cleaned with denatured alcohol and used contact cement. smear on both the fabric and the metal wait 5 minutes press. It has been in place for over two years. I live in Cali, so the soft top in on MOST of the year.
  4. That fuse block is notorious for melting due to the heat generated. i and a few others here have btpassed the fuse with an inline one
  5. Kent. Reseat the top and latch it down. MOVE to a LEVEL spot and try again.
  6. While habitual belching is indeed nasty, the occasional burp, like after a nice long chug of Diet Pepsi, man that is livin'.
  7. Replaced the thermostat, gauge went up to half and then down. Just like the days of old (last week). I'll hit the freeway tomorrow morning for the ultimate test. The old one 'looked' OK, but who knows, a little pin hole and the whole thing is compromised. Thanks guys.
  8. Yes Hemi the head does say remanufactured. I have had the car for several years.On initial start up the temp gauge goes up past 3/4 before it dives back down. This is a new, it usually went to about 1/2 or a little more before diving down. It seems to be opening late. The temp stays good in town driving after the initial scary temp rise, but at freeway speeds gets up past 3/4.
  9. So I've been looking into my cooling problem. My Blue Book says the thermostat housing or water box has a plug on the top to 'burp' the system when refilling the radiator. Mine does not have this plug never has it is smooth on top . Is my motor an early build? Does this present a problem as I can not 'burp' the coolant system. I am going to replace the thermostat tomorrow.....if time allows.
  10. Saturday I was driving down south to see my mom. It was in the high 90s. Most of the trip was uneventful, but after an hour of driving at 65 the temp gauge was creeping up to the 3/4 mark. It has never done this before. I slowed to 60 and it stayed there, for a while. It then crept a bit over the 3/4 but never into the HOT zone. I pulled over and checked the coolant level. The reservoir, it was churning but not overfilled or empty. I have driven in the heat plenty of times before, AC was not on as the top was down. Got any clues as to why the change in the temp reading?
  11. Hey not to jack this thread but what is the correct part number for the 89 water pump. I may be replacing mine soon.
  12. You checked the fuse box on the passenger side fender well? Small rectangular black box?
  13. There is a fuse in there also sounds like it is shot.
  14. this will solve at least one of the TCs inadequacies
×
×
  • Create New...