45rpm

NOS 1965 Pontiac GP drivers side tail light assembly. Beautiful shape. gasket is soft, ready to install in your car. cheaper than replating. no disapointments. Asking $110.00 OBO Located in Lisle Ill. 30 miles due west of Chicago contact: psychopalooza@yahoo.com Thanks scammers need not reply

NOS fuel filter gas filter for 1965 and 1966 Pontiac 389 326 engine with A/C. identified as GF-414 GF414 GF 414 part # 5651119 . determine application. Would be nice addition to a restoration. GTO, Lemans, Tempest, Grand Prix, Bonniville, Catalina. May fit others. What you see is what you get. Located west of Chicago Illinois. Asking $35.00 OBO contact psychopalooza@yahoo.com Thanks

1955 Buick hood orniment/medalion. good shape, some pits, good for a driver. Asking $20.00 OBO. comes with screw and 'cup' washer. If you are looking for one, lets talk. Contact: psychopalooza@yahoo.com located in Lisle Ill. near Chicago Thanks

Front hood casting for a 1970 1971 or 1972 Skylark/GS. Not sure if it fits one two or all three years. Straight, zero cracks, all studs intact, some light pitting in area near paint, and in 'crease'. Casting number 1239087 see pictures. Good for a driver. asking $20.00 OBO Located in Lisle, near Chicago contact psychopalooza@yahoo.com Thanks

For sale, complete set of wheel well mouldings from a 1970, 1971, or 1972 Buick Skylark/GS (5 pieces). Trim is in good shape, a few scuffs and the like on the UNDERSIDE. The part you see is really nice. No kinks or dents. Pix will follow. Located in Lisle, near Chicago. asking $130.00 for all 5 OBO contact me at psychopalooza@yahoo.com thanks scammers need not reply

Beautiful pair of NOS tail lights/housings for a 1958/9 Rambler Ambassador car ( please verify aplication). Lenses are clear with no scratches or cracks, or chips or hazing. Casitigns are beautiful. Rubber boot is missing around one socket ( see picture). This would really complimet a fresh restoration. Priced below what it would cost to rechrome even one housing. Disclaimer. NOS does not mean flawless and perfect. Even NOS parts have shelf wear and slight blems. IF you require pictures of a certian area, please let me know and I will do what I can to accomodate you. search NUTSM NATSM Hall 24749. asking $180.00 OBO for the pair ( 4 pieces as shown) located in Lisle, near Chicago Ill. contact psychopalooza@yahoo.com Thanks scammers need not reply.

1968 Buick rear side marker lens and bracket. Nice plastic. Clip is solid, need to be stripped of old undercoating. asking $15.00 for the pair. located in Lisle, near Chicago email at psychopalooza@yahoo.com

1968 Buick Electra grill divider, some rust, but very solid, dont let the color fool you. One 'nick' on the center crease, EASY FIX (see picture). I would do it, but I want you to see the way it is. Emblem plastic is so-so, casitng is pitted. Located in Lisle, near Chicago. Asking $20.00 OBO reply to: psychopalooza@yahoo.com

Pair of 1968 Impala doors from a 2 door, will fit convert., fastback, or coupe MAY fit 1967, but you will have to determine that. Will NOT fit 1968 Caprice. I removed these doors from a 1968 Impala coupe (not fastback) that I drove back form California, 15 years ago. These doors are clean all over inside and out, with the exception of the classic rust in the front/inner area (see pix) , where the water catches. NO rust on the skin, or the seams, period. Has wing window, but no glass, as the glass used will depend on the body style. The doors had been repainted before I got it with the dark blue color you see. They were light blue origianlly. I 'razored' off some of the paint, that is why primer shows thru. Recomend stripping the top layer off before repainting. These are nice. Note that the 'knockout' has been removed, as the door had power windows. Use these to replace you rusty doors. What you see is what you get. Asking $140.00 OBO for the pr. Located in Lisle Illinois 60532 contact me at: psychopalooza@yahoo.com Thanks for looking.

For sale: 1968 Chevrolet Chevy Impala/CapriceBel-Air front end sheet metal Header, core support, radiator support, latch mechanism, upper grill, and support below upper grill (rivited). All still attached as one unit. Grill is nice, typical age-wear with one very small dent in top surface, metal is solid with only surface rust. No headlight trim. Good for driver or having as extra parts. Asking $30.00 for all. Located in Lisle Illinois email: psychopalooza@yahoo.com Thanks : )

1969 Impala custom ( 2 dr ht) rear window and rear 1/4 windows. Tinted. good shape, used. Asking $30.00 for all three (3) pieces. 1/4's have the metal brackets with them Located in Lisle Illinois email: psychopalooza@yahoo.com Thanks

1968 Buick Electra ( Wildcat?) dash pad. Really nice black dash pad. No cracks or blisters. Has A/C vents included, nice. Sorry if this is posted multiple times, but I just figured out how to add pictures. Asking $80.00 Located in Lisle Illinois, near Ogden and 53 email at: psychopalooza@yahoo.com Thanks

For sale: 1968 Buick full size front grill. no cracks, some slight scuffs, some pitting, not perfect. Pass side better than drivers side. Good for a driver. Asking $30.00 Located in Lisle Illinois, near 355 and Ogden email at: psychopalooza@yahoo.com Thanks

1968 Buick full size bumper, no dents, but appears to have been replated at one time in its past. Chrome is flaking near the bottom. Good for a core. <span style="font-weight: bold">Asking $20.00</span> pix available located in Lisle Illinois near 355 and Ogden email at: psychopalooza@yahoo.com Thanks

For sale: 1968 Buick Eelctra ( Wildcat?) rear bumper, complete with brackets, lights, etc. Bumper is pretty straight with only one small dent in the one corner. Chrome is not pitted, but is faded/worn. Tail lights are good, but pot metal around them is pitted, but not broken. Good for driver or core. Bumper Boyz gives 100 for a core. <span style="font-weight: bold">Asking $45.00</span> Located in Lisle Illinois, near Ogden and 355 pix available email: psychopalooza@yahoo.com Thanks