Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About graat

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello Buick lovers; i'm looking for the upper grill bar ( mustache) plus both extentions for a 1951 Buick Super Dynaflow is there anybody who can help me out here? It does not have to be perfect, it must be heathy material, so good drivers quality. Let me know please. I'm in the Netherlands.
  2. graat

    1933 Engine Swap

    Hello to all. I'm looking for an 1933 Master 181cu engine, either complete or the lower half, must be in a good condition. Also i'm looking for a proper suitcase for on the trunk rack also the emblem on the rack. Can anybody help me out here ? let me know please. I'm living in the Netherlands. best regards Graat
  3. Thanks Mark , but Jacks Model A&AA does not have the wheel locking ring, does anybode have some more suggesstions ? the tyre size is 34 x 4 1/2"" regards Graat from the Netherlands
  4. wanted for 1917 REO M the starting handle ( crank handle) who can help me out here ? see my other request for REO wooden wheel ring Graat Netherlands
  5. hello , we are in need of the steel ring that fixes the tire to the wooden wheel for this 1917 REO type M, is there anybody who can help ? either with ring or adresses where to purchase. Le me know please Regards Graat Netherlands
  6. I am in need of 4 very good used hubcaps for 1931 Buick 67, watch the letter B in the center<v:shapetype title="Stick Out Tongue" class="inlineimg" id="_x0000_t75" stroked="f" filled="f" path="m@4@5l@4@11@9@11@9@5xe" src="http://forums.aaca.org/images/smilies/tongue.png" alt="" border="0" o:preferrelative="t" o:spt="75" coordsize="21600,21600"> <v:stroke joinstyle="miter"> <v:formulas> <v:f eqn="if lineDrawn pixelLineWidth 0"> <v:f eqn="sum @0 1 0"> <v:f eqn="sum 0 0 @1"> <v:f eqn="prod @2 1 2"> <v:f eqn="prod @3 21600 pixelWidth"> <v:f
  7. Hello Bifda here is a picture of the one we have. it is located on the driver side of the engine. I noticed that yours is not so perfect anymore. this is what we are looking for regards Graat
  8. how much for the manifold please ? you can send it to my personal mail address; graat50@online.nl regards Graat
  9. Hello 32Stude I have some more information on the exhaust manifold; the outer studs are 51CM apart measured hart on hart i will send a picture as well , but my printer broke down so i cannot scan some pictures Graat
  10. hello 32Stude, i will come back to you with some more detailed information on my manifold so we can compare, picture + measurements. PS the # on my manifold is 127361-1 perhaps this helps ? Graat
  11. hello Studebaker lovers, I'm in need of an exhaust manifold for 1930 Dictator 6 cilinder , is there anybody that can help me out here ? all info and offers are welcome, please help i tried mr Kapteijn , but he can not help.. regards from the Netherlands, Graat
  12. Hello , I'm in need of a very good used or new starter ring gear for 1954 Manhattan 6 cyl Automatic. The ring gear is attached to the flywheel with 30 bolts. Also there is a gasket fitted ( with 30 holes ) Is there anybody who can help me out here ? All information is welcome , please help greetings from the Netherlands Graat
  13. Hello Mark , The model 57 pump does not fit the model 67. The pump must have the number 8-60 and the BUICK mark on it. If these markings are correct than the pump will fit.You could check on those for me to be sure. thanks a lot Graat
  14. hello Buick lovers. I'm in need of a complete oil pump for 1931 model 67 is there anybody who can help with a healthy pump ? all tips are welcom. Best regards from the Netherlands Graat
  15. Hello Wanted for 1935 Airstream tail light lenses and glove box. The lenses are 9 cm in diameter ( about 3 9/16 ??) is there anybody who can help either with good lenses and glove box or addresses where to purchase these parts , Greetings from the Netherlands Graat
  • Create New...