-
Posts
246 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Dave 38
-
-
Nope.
-
I am in Placerville,Ca.
-
The guy on the running board is a friend of mine.
-
-
Bumping.
-
Placerville.
-
-
Helping a friend that's moving sell some of his stuff. 37 L /R front fenders e-z fix. 37/38 -2 coupe rear r/fenders 1 rotted out at running board, other o/k. 3 l/fenders all can be fixed ,1 in bad shape ,but can be fixed too. 37/37 L&R c-dan rear doors ,nice shape. Pick up here only. Come and make an offer. Also have a 38 Chrysler/ Desoto /39 Plymouth Coupe seat . Good shape !
-
My engine builder has a Dyno.Might just do that for fun.Iam off for 2 weeks but can't work on the car. I tried to take off 3 fingers last week! So I'll do what I can on it.
-
Iam setting the valves today on my 230 cu.in. Dodge. And the book only shows 10 hot int & exh. Anyone set cold ?. I was thinking 12 to 14 until I get it up and running. Thanks
-
Only 4 heads made, I have no.3
-
-
-
Why can't you be on the left coast?
-
Thanks so much hwellens, it looks like mine.I'll keep looking for this in a manual. Cheers
-
Maybe it dose not take a shock eliminator at all. I need a photo!
-
-
It's the same. Mine is a stock sway bar.
-
Thanks hwellens. But I need drivers side.
-
-
Yes, but the holes for the bracket are covered by the sway bar bracket. Only one hole is open.I'll post photo later.
-
It's on the wrong side.
-
I checked last night, and the shackle is in backwards. But there is no room for the bracket . If I didn't have the sway bar it would fit. Anyone with a sway bar out there ?
-
I think the sway bar is in the way. But I'll check. Thanks
Working on my 38 Dodge
in Dodge & Dodge Brothers
Posted
Doing the final sheet metal fitting. It fits good! Get primed up and let it sit for a month or two. Need to finish up drive train. I think I have everything I need ,just some small parts to chase down. Cheers