Dave 38

Doing the final sheet metal fitting. It fits good! Get primed up and let it sit for a month or two. Need to finish up drive train. I think I have everything I need ,just some small parts to chase down. Cheers

Nope.

I am in Placerville,Ca.

The guy on the running board is a friend of mine.

Selling for a friend . Front and rear fenders 2 sedan rear doors. I also have a coupe seat that nice. Come and make an offer. Sorry no shipping .Pick up only. ps, I have 3 37-38 Plymouth tail lites. 2 repos that came with my car in the 70s and 1 org .

Bumping.

Placerville.

291 Desoto hemi, All there with lots of extras.Pick up only. Iam in nor-cal $700 Thanks,Dave

Helping a friend that's moving sell some of his stuff. 37 L /R front fenders e-z fix. 37/38 -2 coupe rear r/fenders 1 rotted out at running board, other o/k. 3 l/fenders all can be fixed ,1 in bad shape ,but can be fixed too. 37/37 L&R c-dan rear doors ,nice shape. Pick up here only. Come and make an offer. Also have a 38 Chrysler/ Desoto /39 Plymouth Coupe seat . Good shape !

My engine builder has a Dyno.Might just do that for fun.Iam off for 2 weeks but can't work on the car. I tried to take off 3 fingers last week! So I'll do what I can on it.

Iam setting the valves today on my 230 cu.in. Dodge. And the book only shows 10 hot int & exh. Anyone set cold ?. I was thinking 12 to 14 until I get it up and running. Thanks

Only 4 heads made, I have no.3

The engine. Just need the head to be finished.

Well it only took 40+ years ,but I got primer on the Boznetic Coupe'. Hope to have paint on in a mouth or so. Engine is done, need to finish the head.Cheers

Why can't you be on the left coast?

Thanks so much hwellens, it looks like mine.I'll keep looking for this in a manual. Cheers

Maybe it dose not take a shock eliminator at all. I need a photo!

More pix. left & right.

It's the same. Mine is a stock sway bar.

Thanks hwellens. But I need drivers side.

OK, one more photo. This where the bracket would go ,if the sway bar was not there. Any buddy out there have a sway bar in your car?

Yes, but the holes for the bracket are covered by the sway bar bracket. Only one hole is open.I'll post photo later.

It's on the wrong side.

I checked last night, and the shackle is in backwards. But there is no room for the bracket . If I didn't have the sway bar it would fit. Anyone with a sway bar out there ?

I think the sway bar is in the way. But I'll check. Thanks