1928fb

Hi Bill, I have a small box that has 1927 studebaker on it that, I bough along with stuff for my 1928 president. There are some handles along with other things in it. Could you post pictures and I will see if they are the same. Thanks Phil

Hi Scott, I am interested in the pull handle on the curved windshield frame. Also the special 6 plates that mount above the running board . let me know the price . Thanks Phil

Hi Tom, a great job on a neat car. Phil

Hi Ken. The fenders will be black.The body will be the same hunter green as the hood. The windshield frame and post will be black.The splash guard and frame covers will be black. The disk wheels will be black with the lock ring hunter green. Phil

Hi These pictures are before and after I painted the hood.That was a lot of time and sanding. Phil

Hi, I am looking for a chain guard that bolts below the damper for my 1922 special 6. Thanks Phil

This is my 1947 M5 I have also been working on That was in the earlier photos. I found it in a field no engine or transmission no seat and much more.I am near the end the engine runs great and I replaced all the parts that were needed.I need to get the glass in and the doors on and I will be done.

Hi Studeboy, Thank you for your input I think you are correct . Phil

Hi Ken, Thank you for the craigslist link. It was interesting to look at, but I think it is a light 6. The engine I think is late 20's. I have most of the parts for the car. I need Some over size pistons at a good price so I can have it bored to clean up the cylinders . Thanks Phil

Hi, Here is what I have been doing while I look for parts. I found valves, valve guides,and valve springs from EGGE. They are out of pistons, but can make them for around $200.00 Per piston. Phil

Hi I am Cleaning & painting the fuse box and there are no fuses in it . I looked in the service manual for what amp they are but could not find it there. Does any one know what they should be. There are 5. Tail light, Extra,Horn, Head Light L & Head light R. Any help would be appreciated.Thanks Phil

Sorry, I do not have another generator, But will keep an eye open for one.Phil

Hi I got good news on the head so both the head and upper block were Magnafluxed and cleaned. So I brought them home untell I can find parts . I painted the head and water manifold. I also am Painting the upper block In & ex manifolds. The Picture of the upper block is the one I am replacing No need to Mag that one.Phil

HIi Scott, Thank you for the reply to this post. The special 6 pistons are 3.50 diameter and the 3.87 are big 6. The valves I have the head diameter is 1.875 the stem diameter is .372( Same as yours) the length is 6.50. I do not think they will work. The machine shop is checking on what it will take to clean up the cylinders. Thanks again Phil

Up date 6/29/15 Hi I received some good news about the upper block there are no cracks. Last week I found the head was cracked ,So I brought the 1923 head that came off the good block To check. I will find out about that one in the next few days. Now I will need to find Pistons & Rings, Valves & springs Valve guides To Begin with. If you have any of these parts let me know.