CTX-SLPR
-
Posts
617 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by CTX-SLPR
-
-
Well that got my attention, though not for the body mount part at first (which is on page 3). That leather wrapping job of the lower dash and console (not so much the other trim items) is very inspiring.
Thanks for the reference.
-
Thanks for the reference, I’ll check it out.
-
I've ordered tempered glass with holes in it from a local glass company frequently for work. The laminated stuff gets harder to deal with as the drilling I don't think reacts well to the plastic layer. I remember the old school trick to cutting laminated glass down was to score one layer, fill the cut with alcohol and light it on fire to soften or burn the plastic then snap it. Never did it so could be wildly wrong there.
The Sanders folks offer production off of your template so could try that and see what they say about both if the stocked stuff has a hole and if they could put one in. I know they give the option of tempered and laminated.
-
1
-
-
2 hours ago, 60FlatTop said:
Life is not always easy among those whom try to reinvent the wheel.
If I wanted the easy (car) life I’d own a Camaro or a Chevelle or have kept that Skylark I sold because I wanted a Riviera again.
-
1
-
-
I want to be clear, I am trying to reinvent the wheel here. So while I know I can buy mostly accurate round ones and functional round replacements for the rear oval bushings, I want to try different durometers. If I’m going to make molds, why not make an oval one?
Thanks
-
They sell the round mounts but not the oval mount. Anyone have dimensions for the outside profile of the oval mount to try to make a mold for?
-
Howdy,
My '64 is an early production with the '63 style windows and since I need to replace the glass, it seems like a good idea to swap up to the later style bolt in glass. Is it just swap the sashes out or are there more parts needed?
Thanks
-
It’s not a stud, I never pulled any of the others to see if it was any longer but I remember for sure it’s a bolt with the head on top of the bracket annoyingly.
-
I'll admit I thought about rigging up a double glazed setup for the Riviera using custom glass templates so the back piece still uses all of the weatherstripping for seals but the outer piece and seal were undersized. Can't come up with a good way to evacuate all the moisture out in a DIY setup so mostly dropped the idea.
-
Never used these folks but have been eyeballing them for my weld/grinder splatter damaged side glass
https://www.sandersreproglass.com/
They do offer a fair number of options for lamination, edge grinds, etc.
-
1
-
-
Is the Super 33+ higher temperature rated? I've had a lot of trouble with Super 33 turning into a gooey mess even inside the passenger compartment, much less the engine bay.
The best stuff I've used is made by Plymouth and I was going to say it's expensive but Waytek Wiring has it for much less than what I remember
https://www.waytekwire.com/brands/plymouth-rubber/Electrical-Tape
Looks like I'll switch back to that stuff for the engine bay and keep the TESA tape for the cabin.
-
I piggy backed off of the hole for the HVAC cables in the center firewall grommet for my vacuum/boost gauge and the Tach input. The rest of mine I opened up the speedometer hole slightly since I no longer have a cable driven speedo and added a 30 position cannon plug to get the EFI and gauge signals through.
If you are going to add a hole I’d suggest down by the throttle lever but closer to the midline of the car, that way it’s behind the console extension and pops out very close to where you’d tap into the oil pressure and water temperature sending units on the back of the block and head respectively.
-
The interior is a nightmare but the rest of it carries a theme. Not my taste but it is still Buick powered and has some form of glass in at least the front and back (and the wing windows) for the chopped top so it's had some decent thought and effort put into it.
-
1
-
-
12 minutes ago, Rivdrivn said:
I have not replaced my body mounts; just a body-on-frame refurbishment of an otherwise well-preserved original. No excessive gap that I can see, although the door does sag quite a bit. New bushings are on the list.
Mind taking a picture top down like that first picture in front of the mirror?
Thanks
-
I use Harness Tape from CE Electrical (https://ceautoelectricsupply.com/product/tesa-34-pet-exterior-tape/)
-
Can we download the whole paper somewhere? It looks like it has a lot of the suspension dimensions I've been searching for but I can't find it in the members only section.
Thanks
-
Howdy,
Do all 1G Rivieras (63-65) have this oddball door skin to fender gap:
Mine certainly does and it bugs me. I'm guessing it's there to have the door slip under the rear of the fender when it opens all the way (just got back from overseas and haven't played with mine).
Thanks
-
That's far too much work for my goals and I already have enough headroom issues with the stock roofline.
I'll stare at the car now I'm back home and see if I even want to consider it seriously. Rear windows mechanism is already due for rework.
-
On 7/20/2023 at 4:19 AM, telriv said:
Yeah, just get rid of the vent/wing windows like Bill did & you now have a much bigger choice of different mirror options.
Whos going to be 1st???
Tom T.
To be honest... I'd be happy to remove those windows despite how well they work on getting cool air in without the AC. I need new side glass anyway (welding spatter from the floor replacement) and am debating going with a Mercedes S-klasse like double glazed window since it's just flat sheets. Anything to help the over taxed AC system, especially since I had to swap down to a Civic Sanden compressor to clear the suspension with the engine setback.
-
For a car like most of ours, they won't move much but my other cars move everytime my wife and I swap cars. I do however want power mirrors on my '64 especially with the original sized mirrors and I often want to look around with them, especially when reversing, since the field of view is so small.
-
Double check your door lock rods, especially the one that goes up through the door card as mine rattled.
-
1
-
-
After posting the picture, do all 1G Rivieras have that weird door gap at the top of the door skin to the back of the fender? Mine certainly does and it bugs me.
-
Howdy,
So I have an idle habit of watching Bring a Trailer and Cars and Bids for stuff and a semi-custom '63 (https://bringatrailer.com/listing/1963-buick-riviera-33/) caught my attention as having a fair number of subtle changes on the same color scheme as my 64. While some of the changes, like the door panels) are definitely pass in my book, the new door mirrors are a bit divisive between my wife and I.
I'm mixed and she's definitely a no.
What are y'all's thoughts?
-
I have front discs and had the stock AlFin's in good shape on the original "jelly jar" and a 96 Roadmaster disc/drum master with manual proportioning valve. The discs aren't hugely better than the AlFin's if the system is working correctly. The Roadmaster master and AlFin setup was a bit touchy but worked well though I never worked the prop valve to optimized a front rear lockup balance.
I'd suggest new hoses all round and a direct swap (with some new hardlines) '67 drum/drum master cylinder plus prop valve and call it sorted.
-
1
-
Body Mount Drawings or Sample Part(s)
in Buick Riviera
Posted
Went trolling through vendors to order a mount from to copy geometry and found Rubber The Right Way had dimensions on their site. Can someone check the stock metal sleeves to get an OD to size the bore to more exactly?