DodgeDD670

I have the front end wishbone, spindles, Mechanical brake center section from a 37 Delivery. top leaf is broken lever shocks front axle I have the horn rod button rod and some column parts some poor remanence of the gauges and rectangular accessory gauges 37 Horn not tested and also some 39 flathead parts 39 horns cowl vent 37-39 nice and clean no rust 38 truck hood latch/ornament assembly F1 column and Coe Columln with gear boxes 50's reasonable offers welcome 469-358-4233 Jerry Text with question or call

This is an early chevy. plymouth, Dodge (Yes) and or it fits. I have seen the replacement gears at Macs (I Think it was Macs) and were listed as 30 chevy. These gears are cast and broken the mechanism is very hard to find. it is seized. This is marked 29 Plymouth and this fits in my 30 dodge but like I said the replacment gears were sold under 30 chevy maybe a width difference? $350.00 plus the ride 469-358-4233 Jerry text or call for more info. Thanks the other was from a buick possibly needs gear work was seized $150.00

This is for an up and down I am not certain of which it came from I have two Wood framed mechanism 325.00 plus shipping it is seized and one gear is broken. This one would fit my 30 dodge but have seen these replacement parts for a 30 chevy but has early 29 plymouth written on it? the metal needs to be rebuilt as it is taken apart. Was seized the main gear is worn out $150 plus shipping much narrower if you need a better pic or hav questions 469-359-4233 Jerry Pay pal is fine

Questions or need better pictures 469-358-4233 text or leave message Dallas, TX area Oil fill tube/DipStick/breather $200Water pump Core $65Fuel Pump Core $30Balancer $100Trans lower dust shield $150Starter Core $100Not picturedClutch, Pressure Plate, Flywheel $350Bell housing with fork $200Distributor $60Fan with bracket $125Pulley $60Lifters and blocks with oilers $300 not seized or anythingBrass Distributor gear $75Oil Pan $100front cover $60All top engine breather tin $60Trans mount $60Engine mount brackets $602 barrel intake $40 Heads Pair $150

They measure about 6 7/8 on the outside diameter and 6 on the inside. I would like to find a set of artillery wheels for the 33 if anyone has a set to sell. I have another set of these I would like to use with artillery wheels for my 33

I just posted these on ebay if anyone is interested They may be for the wire wheel or the Artillery wheels not certain but they are New Old Stock Originals Thank you http://www.ebay.com/itm/1933-34-35-NOS-Dodge-Brothers-Truck-Hub-Cap-Vintage-Dodge-Hot-Rod-Rat-Rod-/111620885931?pt=Motors_Car_Truck_Parts_Accessories&hash=item19fd1f8dab&vxp=mtr

Thank you Kevin ! I found out through a Plymouth owner that the 28-31 Chevy windshield is the same or close. This is the first time I have ever seen anything that would fit. Everything was removed from mine when I got it. They do sound like they are the same as far as the gears etc.

Hello I have a 30 dodge with a crank up style windshield. Were did you find the early chevy mechanism and rubber? You can find many of those T handles on Ebay. Thanks

Hello I need a windshield crank assembly for my 30 Dodge Business coupe it rolls up and down not in and out. I have no idea what it even looks like so if you happen to have one to sell or willing to send me a picture of it That would be greatly appreciated. The glass has two briefcase looking handles on it so maybe there is two separate cranks or a larger double mechanism. Not Sure! Thank you !!

http://www.allpar.com/corporate/bios/dodge-brothers.html Says a lot about Dodge and Ford Glad they Separated! Long Live Dodge!

Very Rare Spider caps have been restored to near perfect other than shelf life lite scratches from being wiped off and or stacking they would be near mint. There are restore marks on the inside. They started off to be a very nice set to begin with. $1600 plus shipping Standard cap these are great for restoration one however need a new body but has a nice center cap. One has a full stainless body the other are steel. these all are 3 piece meaning a stainless ring and center cap formed over the body and can be removed with some talent $235 plus shipping I pack well, Track and insure all items I have individual pictures if you would like to see them Thank you Hurry these wont last Long !

Offers ??? Thank you

OFFERS TRADES ?? Stromberg Carbs 97, 81, 48 Wanted and any vintage performance parts

I am selling an extra pair and a real CQ CL Trim Ring. I have more Pictures available Post Not Accepting my Pictures maybe to large If you have a smaller trim ring to complete the pair for sale please let me know Thank you The first is a single Trim Ring for a CQ CL Headlight. It is Larger Diameter then standard size. $300 it is nice restorable Condition. The Tab is gone and split in that Area. The rest of the ring is in great Shape. $300 C series with the Raked lenses Pair of long buckets Restorable Good Condition Pair of CM Hall smooth faced lenses ONE Smaller Trim Ring NO Reflectors, Or wiring $800 PLEASE PM ME OR SEND EMAIL IF INTERESTED! I CAN ACCEPT PAY PAL AND I TRACK, INSURE and PACK Well !!!! ThanK You Jwreinhardt@hotmail.com

I am looking now for a smaller trim ring. I ended up by accident with a real CQ CL Trim ring. PM Me if anyone has one thank you!!

I will be listing on Ebay low start and No Reserve Thank you

Offers Welcomed Thank you

I purchased these several years ago as 1931 Hupmobile Headlamps. I have a picture of them on a model S currently seen on Ebay and they look identical. They are big and beautiful they measure 10.5 wide and about 7 inches deep they have a screw at the tail. The glass lens are in excellent condition I only can find one tiny chip on the outer edge of one lens, No cracks, The lens are depressed beam, Made by CM Hall Lamp company. There is light pepper marks and few light scratches they will rechrome to perfection. I have never opened them but the reflectors look excellent. I do not know what other makes these will fit or years. $800.00 Or Best Offer Please Plus shipping I pack well, Track and Insure I can accept pay pal also please ask any and all questions you have and if you need a better pic let me know Thank you.

Thank you very much I have a pair now just like HotRod Charlie is selling but not NOS I am looking forward to restoring them. Is there any tech data on restoring head lamp buckets?

My friend at englishautousa.com restoring the 31 Pheaton has some questions if you can help please contact him for me or for Dodge sakes you can go to his website and see the progress photos below is what he needs. I can relay the information to him as well. Thank you for your help would you or your contacts help me with the following The correct shift knob 1 hubcap ( there are some aftermarket ones but trying to get the origional ) wiper arm and wiper blade choke pull 4 clips that hold the headlight lens to the headlight ring a couple of questions is there a rubber gasket that goes around the fuel tank neck and the sending unit they both have a raised lip but do they have a rubber seal as well what is the dementions of the windlace that goes around the cowl

Thank you I will see what they have Anyone else? Thanks

Hello does anyone have one or both of these headlights? They have a split curved lens I guess is how I can describe them. They are large in diameter also Thank you

Hello my friend at English Auto House needs these bolts for a valance. If you have some original dodge bolts from the early 30's like this could you please let him know. Thank you EnglishAutoUSA Please click on parts search at the top of his page so you can see the size and pictures of what he needs. You can also look at the Pheaton project Thank you

Hello Just looking for some restorable Zephyr hub caps. Seeing whats out there and Prices. They fit the wide five wheel PM me with what you have and pics if possible Thank You

I tried Leno for my DD6 and Hemings Motor News No luck Good Luck I have builders remorse also some may not believe that but that the way it is.