handmedownreatta

ive been googling but no results.

thats what im going to do if my brakes need expensive repairs.i never liked antilock brakes anyway.

it just unbolts once you remove the trim.

in nc if its 35 years old you can run a tag matching your cars year.

have you thought about a rear wing instead?unless you need the extra luggage space.

my hitch was sold as for a reatta.it took maybe a month to get.

me too.

id like to have that caddy but id have to swap in a diesel to afford to drive it.btw whats the yellow roadster?

it looks much better after you change the wheels.

i need a set.

i don't want the tail lights on.i see a lot of new cars with led running lights on the front.

i want to turn the three front park lights on each side on the front into daylight running lights.i already have a reatta wiring harness to wire to the ignition on.what white leds do you recommend?

it might be good to spray them with pb blaster a few times before you take it in.

probably safer than the newer ones that spray your face with metal.im glad only one of my cars have them.

the wheels on the fiberglass model look better than the ones they used.i agree the dash could have been much nicer.

at least start with a booster and master cylinder from a 1988 up riveria.

i put a switch on the wire to my antenna since i never listen to commercial radio unless i have to.saving wear and tear on it since i never need it.

thats what i thought.i was hoping it was plug and play.

yes

how does that adapter wire in?ive had my hitch for a while but never wired for lights.

this is what i had until last week.i took some clear lexan and painted the back black to give it a mirrored look.i installed one of those round double usb ports and a stick on phone mount.i hooked a phone jack directly to the radio module in the console beside the drivers seat.i cut the black,green,and brown wires coming out of the plug on the bottom of the radio.black is common and the green and brown are left and right.[or right and left].last week i hardwired in a bluetooth module using the pink antenna wire to turn it on with the radio.now all i do is turn on the radio and hit play to listen to whatever audio my phone or ipod is putting out.put the cassette player wires behind the panel next to the passinger foot well where the fuses are.then you can remove that panel in minutes to temperarly plug in the cassette player when needed. https://www.amazon.com/gp/product/B0725SFMJS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B00MNGCDVS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1i picked that usb charging port because all i had to do was drill a hole to install it.

id say so.

i haven't seen that interior color before.

i wired in a bluetooth module feeding it off the antenna output and feeding into the radio module using the cassette audio wires.so now when i turn on the radio and push the cassette play button it automaticly hooks to my phone and plays whatever audio my phone is currently set to.

i added bluetooth to the factory radio today.