Jump to content

sccars49

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by sccars49

  1. Hi, do you still have trans? If so, email me @ wap1949@comcast.net. Mabe interested in eng also. Thanks, Bill
  2. Hi, still have them? Are they for Sprite or 3000? E mail me please as I don't often visit here. Thanks, Bill wap1949@comcast.net
  3. have a '67 Firebird partially restored(amateur), incl rust repair & paint. needs assembly finished. many new parts incl interior seats, rebuilt eng. all body parts incl & good cond. needs radiator & driveshaft, $10k obo; '68 Firebird, needs complete restore in/out, mostly complete, eng/trans removed when purchased. have other eng(rebuilt) & trans avail. some rust repair needed but minor. $6k obo depending on sell with or w/o eng/trans; '69 Trans am clone conv, older amateur restor, runs/drives, 400, at, new inter seats, body good with very minor rust in trunk lid, surface rust on floor. needs much tlc, $15k obo. pm me or call 269 342-4791 for more info. located in Kalamazoo, Mi.
  4. Thanks to all. I had tried to find this info on line, incl Old Cars Price Guide, but guess I didn't look in right place til I asked here. I appreciate all the responses. It helps a lot. Bill
  5. will someone tell me what the 1-6 condition ratings are & how to define/describe ea one? I can't find the descriptions anywhere. Thanks.
  6. Anyone willing/able to clarify this controversy from another web site? I would appreciate having a good resource for correct info. Thanks. Engine numbers. - The Ford Barn
  7. Thanks to Peter & Chris above for their help. Anyone with added info please advise also. Thanks again.
  8. '40 pu mostly complete but has rust in usual places. Have extra parts available incl frt fenders, hood, grille, rt door, & also cab(off '47). Most extra parts are good, solid parts. Have original eng(torn down) + extra '40 eng & orig trans. No title. $2500, obo for basic truck or $4k for all, obo. '37 pu has complete orig chassis(mech brakes) with 59A-B eng & orig trans & original whls. Also have extra frt/rr axles with juice brakes. Also have 2 good frt fenders & 2 poor but possibly repairable frt fenders. 1 pretty good repairable grille, 1 radiator, 1 repairable hood, useable headlamps, & rr fenders. Cab w/doors is very rough but ok for cutting up to build hot rod. No bed assy but have frt panel & underneath frame work. No title. Prefer to sell all together for $2500, obo, or will sell some of the extra parts separately. Pics for ea available by e mail, wap1949@comcast.net.
  9. I have frt & rr axles assy's for sale, $125 ea, obo, complete or will part out. Also have good solid run boards for sale, $50 ea. , frame brks incl. Not "perfect", but can be with a little work. Also have rr fenders that will need work for $50 ea. pics available by e mail, wap1949@comcast.net, or PM me. Thanks, Bill <!-- / message -->
  10. WTB: 1915-1917 Le ROI Model C eng &/or parts, manuals, or other info. Please pm me. Thanks, Bill
  11. '46-'47 3/4 tn frt/rr axle assy's w/hubs, drums, brake backs & springs. Also have 5 lug wheels but will need centers rebanded. $150 for ea axle assy or will separate for reasonable offer.
  12. looking for info about 1914 to 1919 Denby motor truck & Le Roi model C eng fir that period. Please let me know what you have. Thankyou.
  13. we have a 1914 to 1919 Denby Motor Truck with a Le Roi model C eng & we are trying to get more info to correctly date it. Do you know anything about them to hep us correctly date this eng & truck?
  14. we have a 1914 to 1919 Denby Motor Truck with a Le Roi model C eng & we are trying to get more info to correctly date it. Do you know anything about the Le Roi eng you are seeking other than it was used by Turnbull as well? Ie model & description? How to date the models used?
  15. '40 Ford rolling pickup, $2300. OBO for basic rolling truck only. NO TITLE but have bos. Rusty but have better extra cab & other parts to rebuild the truck available separately @ added cost. Original Flathead v8 eng also available but not complete. Original trans also available but missing shifter. Has original frame & axles also. PM to e mail for more pics or to see.
  16. I have a '37 pu frt axle assy w/wishbone, center transverse spring, hyd brakes & hubs/spindles/drums. Will sell complete for $250 or separate parts. Also have '37 pu rr axle assy w/ctr spring, wishbone, drums, gears & axle shafts for $250. not sure of ratio. Also have '47 3/4 or 1 ton frt axle assy w/dual springs incl hubs, spindles & brakes for $200 & rr axle assy for $200. Also have split ring/rim wheels for 3/4 or 1 ton, $50 ea incl rollable tires that hold air well. Can sell '47 3/4 or 1 to rolling chassis(frame, axle assy's & wheels) for $500, or separate per above + $ 100 for frame separately. Also have misc other parts. can e mail me @ wap1949@comcast,net. Thankyou <!-- / message -->
  17. I have a frt axle assy w/wishbone, center transverse spring, hyd brakes & hubs/spindles/drums. Will sell complete for $250 or separate parts. Also have rr axle assy w/ctr spring, wishbone, drums, gears & axle shafts for $250. not sure of ratio. Also have '47 3/4 or 1 ton frt axle assy w/dual springs incl hubs, spindles & brakes for $200 & rr axle assy for $200. Also have split ring/rim wheels for 3/4 or 1 ton, $50 ea incl rollable tires that hold air well. Can sell '47 3/4 or 1 to rolling chassis(frame, axle assy's & wheels) for $500, or separate per above + $ 100 for frame separately. Also have misc other parts. I will try to attach pics or can e mail me @ wap1949@comcast,net. Thankyou
  18. I am looking for info to rebuild this engine, incl manuals & parts sources. Thankyou in advance for any info returned.
  19. Thanks to those who have responded so far. My friend says there are also "circular ridges" that extend from the center of the hood into the cowl toward each side. Maybe tha will help.
  20. The panel should be coded with the id of the type of plastic as noted above. There are many different plastics used now but only a few back then. You can add polyurethane & polyethylene to the above list. Most likely it is Polypropalene or Polyethelene. I have a plastic welder(basically a solder iron with a temp control) from Urethane Supply Co. I don't have my old lit handy with all the codes but you probably can find out more on the web. Most, if not all, non catalyst plastics can be "welded".
  21. PS: there are supposed to be some kind of louvres or vents in the cowl sides also but don't show up in photo, too light. Thanks, Bill
  22. My friend's brother has this old hot rod which is titled as a Model A Ford, which it is not. Can anyone tell for sure what make/model it is? It also had a golf bag door behind the rt door but was filled in when made into a hotrod. Thankyou, Bill
  23. I am looking for any old literature, adds, manuals, or up to date resources for parts/trucks. We have a Denby truck & need to find out more about it to determine the year built etc. We are also trying to decide if it should be restored or "preserved as is". Please see my post 11/22/08 under "What is it?" for pics, or, "search" Denby to go there.. Thanks, Bill
×
×
  • Create New...