mll1446

Hello I have numerous gm brochures and books for sale from gm

Have several cigar and cigarette lighters mount on steering column or dash

Thank you

Hello I have a 53 f100 with a 6cylinde was driving a long speedometer working fine and then speedometer needle in dash just fell and stopped working? Is this something that can be fixed in dash any and all help appreciated

1930 ford coupe all steel car restored , has complete rebuilt engine by antique engine rebuilders of Skokie, Illinois, new interior, new tires and powder coated rims, everything rebuilt or replaced. Great driver needs nothing. Have owned car for 7 years. just a few other items new interior new seat springs new hood by rootlieb new brakes all around new brake rods new suspension new wiring new tail lights interior has sound deadner/insulation before installing new cross shaft at pedals new running board mat new clutch new bumpers new wheel caps battery shutoff running boards new leak less water pump rebuilt steering column new steering wheel have all receipts and pictures for items done to car asking $15,000 obo located just outside of Chicago,il

1930 ford coupe all steel restored from a basket case, has complete rebuilt engine by antique engine rebuilders of Skokie, Illinois, new interior, new tires and powder coated rims, everything rebuilt or replaced.Has new interior, new rootlieb hood,new glass list goes on. Great driver needs nothing. Have owned car for 7 years have many pics and receipts. Has new interior, new rootlieb hood,new glass, mlogan@larsoncomny.com asking $15,000 obo located just outside of Chicago,il

i have a 19553 ford f100 all stock with 6 volt electrical system. i installed a battery disconnect switch from negative terminal to one side of disconnect switch, and from other side of disconnect switch to where cable was fastened to prior to putting on switch . however the switch will kill the power and wont let truck start but when i have the truck running and click switch to off the truck stays running wont kill truck when running. why is that?

<dl class="userinfo_extra" style="margin: 5px 0px; float: left; width: 180px; height: auto !important;"><dd style="margin: 0px; padding: 0px 0px 3px;"> </dd></dl> [h=2]Chevy small block question[/h] I have a 283 in s 57 Chevy had noisy clattering under valve covers had rocker arms replaced with new original type and 30 miles later clattering is back any ideas? On solution?

I have a 283 in s 57 Chevy had noisy clattering under valve covers had rocker arms replaced with new original type and 30 miles later clattering is back any ideas? On solution?

I am located in northern Illinois- Palatine il, and I do have clear title

was purchased from owner who had 35 years, runs and drives excellent , has overdrive, needs nothing 17,500 obo has seatbelts, sound deadening padding added when placed seat belts, front end overhauled. located in palatine , Illinois for more pics or any questions

I have a 1931 slant window for sale , car is green and black, has overdrive , engine compartment is excellent, interior and paint are great , needs nothing great driver drive anywhere, 18,000 obo located in northwest suburb of Chicago. mlogan@larsoncompany.com for pics

i have a 31 slant window with following steering issue The steering locks at any position but will come back if you turn the steering wheel. All rods steering componenst have been disconnected and greased, disconnected drag link will let steering move when car is on jacks when jack up at spindle top bearing will not move when on jack and spindle is hanging top bearing will turn and steering box seems free. this was done per les andrews book. any suggestions why steering is stiff and when turn the wheel in car taking a turn the wheel will not spin back? any and all suggestions appreciated to make a long story short the wheel is stiff in turning and if driving and make a trun right or left the wheel will stay in that position unless i pull it back it wont spin back on its own and if i didnt pull back i would go in circles. <!-- / message -->

Does any one have the dimensions for the hood on a coupe from the cowl to the radiator? and what length the rods in the hood pieces should be ? aany and all information on hood dimensions from cowl to radiator etc would be appreciated.

FOR SALE IS A 1946 INTERNATIONAL K1 PICKUP ALL ORIGINAL DRIVETRAIN, SHEETMETAL, ETC. TRUCK HAS 6 CYL INTERNATIONAL ENGINE. TRUCK RUNS AND DRIVES , NEW BRAKES, NEW GLASS AND WEATHERSTRIPPING THROUGHOUT CAB. ALL LIGHTS WORK,HEATER. COULD USE TIRES , DRIVE AS IS , RESTORE OR PERFECT FOR RAT ROD. LOCATED IN NORTHWEST SUBURB OF CHICAGO. EMAIL MXZX@SBCGLOBAL.NET. 4450 OBO

mll1446, it is a 1930 coupe standard, it is probabkly 1/2" out of alignemnt, body not removed from chassis. could cowl lacing be to thick? I am not an expert, but there are several possible things to try. How far out of alignment are we talking about? Lets start by trying to understand the problem better. What body style? Has the body been removed from the chassis during a restoration, or has just the hood been replaced? Can you post some photos of the problem?

I purchased a remanufactured hood and the lines from the body t o the hood I cant get them to line up the hood line is higher than the body any suggestions?

I am looking for an original 1936 chevrolet 2 dr master sedan, The car was original , it had wood running boards when sold. Beleived to be sold to person who lived in roscoe illinois. any information would be great, trying to locate this car. Thanks mike mxzx@sbcglobal.net

anyone know what this dodge bros emblem is from and ehat type of car or year ? thanks

can anyone tell me what attached pic of dodge bros emblem is from? year model etc. thanks in advance

WANTED TO BUY INTERNATIONAL TRUCK PARTS OR WHOLE TRUCKS 1941-1949 K1-K3 OR KB1-KB3. PIECES,OR WHOLE TRUCKS. pLEASE EMAIL TO MXZX@SBCGLOBAL.NET THANKS IN ADVANCE MIKE CHICAGO,IL

cAN ANYONE ID THIS HOOD ORNAMENT? AND WHAT IT BELONGS TO? MXZX@SBCGLOBAL.NET THANKS FOR HELP

ANYONE KNOW WHAT THIS IS FROM? ITS A HOOD ORNAMNENT? MXZX@SBCGLOBAL.NET

PLEASE SEND ANY INFO ON THIS HOOD ORNAMNET TO MXZX@SBCGLOBAL.NET OR WHERE MAY FIND WHAT THIS BELONGS TO?

DOES ANYONE KNOW WHERE THIS HOOD ORNAMNET IS FROM? CANT SEEM TO FIND ANY PICTURES OR INFORMATION? ANY INFORMATION PLEASE SEND TO MXZX@SBCGLOBAL.NET THANKS