|
|
#525011 - 07/21/08 01:38 PM
Starting problem '16DB
|
Member
Registered: 05/25/07
Posts: 44
Loc: Southern California
|
Have just installed a new inline fuel pump,fuel filter and dial pressure regulator set at 1 1/4 psi. Initially, the car started but died out and won't restart.
Reset the dial at 3 and she fired right up. I don't want excess pressure on the carb. Does anyone know if this setting is too high? Set it back to 1 1/4 and stops. Reset again at 2 and it stops.
Edited by vergil (07/21/08 05:23 PM)
|
|
Top
|
|
|
|
|
#525202 - 07/22/08 12:07 AM
Re: Starting problem '16DB
[Re: vergil]
|
Member
Registered: 07/30/04
Posts: 80
|
vergil
WHY use this set up when the vacuum pump is such a reliable system??
bob
|
|
Top
|
|
|
|
|
#525208 - 07/22/08 12:30 AM
Re: Starting problem '16DB
[Re: bobs1916]
|
Member
Registered: 05/25/07
Posts: 44
Loc: Southern California
|
Hi Bob,
I use this setup for two reasons: 1) the car came equipped with such a setup and 2) I have as yet been able to locate a reliable vacuum pump. Any info on finding one would be greatly appreciated. I check ebay every day.
Bill
|
|
Top
|
|
|
|
|
#525425 - 07/22/08 10:22 PM
Re: Starting problem '16DB
[Re: vergil]
|
Member
Registered: 07/30/04
Posts: 80
|
Bill
I located a few and put the best parts together to make one. The inside tank had many pin holes which I sealed with POR 15 and its been fine for the last year . The tank has GREAT draw from the tank and NO problems as yet with that set up. I may be able to help you out with tank parts but I don't know if I have a complete one.
bob
|
|
Top
|
|
|
|
|
#525435 - 07/22/08 10:58 PM
Re: Starting problem '16DB
[Re: vergil]
|
Member
Registered: 05/25/07
Posts: 44
Loc: Southern California
|
Bob
Thanks so much. I'll have to take the tank out (what there is of it) and check to see what is needed. Externally it's missing the fuel tank and manifold tube fittings as well as the tube to the carburetor. I may not be able to get at that right away, but will try soon. I've just put four weeks into installing a new top.
Bill (vergil@ix.netcom.com)
|
|
Top
|
|
|
|
|
#525627 - 07/23/08 06:54 PM
Re: Starting problem '16DB
[Re: vergil]
|
Member
Registered: 07/30/04
Posts: 80
|
Bill
re installing a new top .....Where did you get it made and at what cost???? I am up to that stage myself. How difficult is it to install??
thanks
bob
|
|
Top
|
|
|
|
|
#525650 - 07/23/08 08:20 PM
Re: Starting problem '16DB
[Re: bobs1916]
|
Member
Registered: 05/25/07
Posts: 44
Loc: Southern California
|
Bob
Send me a pm and I'll try to explain.
Bill
|
|
Top
|
|
|
|
|
27093 Members
90 Forums
120551 Topics
539736 Posts
Max Online: 479 @ 03/26/08 04:18 PM
|
|
|
Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be
FOUND HERE!
|
|
|
Previous Topic
Index
