25182 Members
87 Forums
114355 Topics
506850 Posts
Max Online: 479 @ 03/26/08 04:18 PM
|
|
|
Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be
FOUND HERE!
|
|
|
#508271 - 05/08/08 12:08 PM
SSII wheel bezels
|
DougO
New Member
Registered: 05/15/07
Posts: 8
Loc: Ontario,Canada
|
I purchased a set of SSII wheels for my 71 Cutlass and am in the process of refurbishing.My concern is the proper removal of the 5 stainless bezels on each wheel.I tappears the they just pry off,but I would appreciate some guidance.Many thanks...Doug
|
|
Top
|
|
|
|
|
#508285 - 05/08/08 01:20 PM
Re: SSII wheel bezels
[Re: DougO]
|
joe_padavano
Member
Registered: 08/21/06
Posts: 306
Loc: Northern VA
|
Pretty close. The inboard end (closest to the wheel center) pops out. Then slide the bezel toward the wheel center to disengage the outboard (wide) end. Installation is just the reverse. I usually squeeze all the tabs a little before reinstallation to prevent them from rattling.
_________________________
Joe Padavano
64 Jetstar 88
66 442 conv
68 W-30
69 H/O
69 442
70 W-30
72 442
86 Caprice wagon (w/307 Olds)
|
|
Top
|
|
|
|
|
#508293 - 05/08/08 01:53 PM
Re: SSII wheel bezels
[Re: joe_padavano]
|
DougO
New Member
Registered: 05/15/07
Posts: 8
Loc: Ontario,Canada
|
Many thanks Joe.
|
|
Top
|
|
|
|
Moderator: rocketraider, R W Burgess, 24T42, Peter J.Heizmann, Steve Moskowitz, Brenda Shore, gagliaj
|
