Parting out two 88's - Antique Automobile Club of America Discussion Forums

You are not logged in. [Log In] AACA Discussion Forums » Forums » Buick Club of America » Buick Reatta » Parting out two 88's

Participating Clubs

Who's Online

51 registered (Olds 442, olympic, g-g-g0, MCHinson, sheldon, GMPARTSMAN, 4 invisible) and 152 anonymous users online.

Forum Stats

25182 Members
87 Forums
114353 Topics
506826 Posts

Max Online: 479 @ 03/26/08 04:18 PM

Newest Members

Need Help?

Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be FOUND HERE!

Page 2 of 3

Topic Options

#484567 - 02/03/08 07:08 PM Re: Parting out two 88's [Re: 88blue90black]
NEMO NEMO Member Registered: 11/27/07 Posts: 35 Loc: new york	I still need the crt and need to know how much ,E mail me rkempst@suffolk.lib.ny.us NEMO _________________________ nemo
Top

#484588 - 02/03/08 08:44 PM Re: Parting out two 88's [Re: 88blue90black]
Jeffoto Jeffoto New Member Registered: 01/07/08 Posts: 9	Nah nevermind... the impact strip is pretty involved for removal. They are bolted from the inside. thanks anyways. Jeff
Top

#485835 - 02/08/08 05:55 PM Re: Parting out two 88's [Re: 88blue90black]
gr8scott gr8scott Member Registered: 06/24/02 Posts: 123 Loc: Oceanside, CA	I could use the bladder from the lumbar support - if it has a working one.
Top

#485998 - 02/09/08 02:19 PM Re: Parting out two 88's [Re: 88blue90black]
Lane Loman Lane Loman New Member Registered: 02/09/08 Posts: 2 Loc: Indiana	Do you have wheel lug caps available? Lane
Top

#486390 - 02/11/08 12:19 AM Re: Parting out two 88's [Re: Lane Loman]
88blue90black 88blue90black Member Registered: 11/17/06 Posts: 63 Loc: Centuria, WI	~gra8t scott. I am sorry to say that I don't have the bladder. The plastic was wrecked and if fell apart. ~Lane Loman. I don't think I do. I believe the only one that I did have was wrecked as well. _________________________ 88blue 88black parting them out 90 Black/Black/Tan 1984 Pontiac Fiero Sport Coupe white/tan/stock
Top

#487546 - 02/15/08 12:56 PM Re: Parting out two 88's [Re: 88blue90black]
craig hewitt craig hewitt Member Registered: 01/15/08 Posts: 36 Loc: Utica Mi	i need afrt clip minus left fender 90 mawi blue color dosent 586-726-5490 craig futza1@gmail.com _________________________ three 91s Reattas white green and black 1990 maui blue two mark IIIs and a 89 635csi bmw bronzit with m5 wheels 91 trofeo red and suburban for the family truckster
Top

#487689 - 02/15/08 11:48 PM Re: Parting out two 88's [Re: 88blue90black]
WK Davis WK Davis New Member Registered: 02/15/08 Posts: 1 Loc: Texas	I need the headlight motor assembly for the driver side of a 1989 Reatta. I think it is the same as the 1988. Do you have a working unit? thanks, WK Davis
Top

#489351 - 02/22/08 09:23 PM Re: Parting out two 88's [Re: WK Davis]
88blue90black 88blue90black Member Registered: 11/17/06 Posts: 63 Loc: Centuria, WI	Craig Hewitt, uh, I am not quite sure of what you mean. Could you tell me where about it would be? WK Davis, I do have the motor, but I am unsure if it is good or not. I believe the headlight motors are the same with all the years. They are also the same with the 87-88 Pontiac fieros. If they need to be rebuilt, they are pretty easy to rebuild. It would be easier to send a PM to me. I am able to respond to those a little faster. Edited by 88blue90black (02/22/08 09:26 PM) _________________________ 88blue 88black parting them out 90 Black/Black/Tan 1984 Pontiac Fiero Sport Coupe white/tan/stock
Top

#489356 - 02/22/08 09:41 PM Re: Parting out two 88's [Re: 88blue90black]
craig hewitt craig hewitt Member Registered: 01/15/08 Posts: 36 Loc: Utica Mi	The frt clip consists off frt bumper asm headlights turn signals and trim between bumper and hood hood and fenders however i don't need left fender thanks Craig Hewitt 586-726-5490 six reattas and a 635 csi BMW _________________________ three 91s Reattas white green and black 1990 maui blue two mark IIIs and a 89 635csi bmw bronzit with m5 wheels 91 trofeo red and suburban for the family truckster
Top

#489795 - 02/24/08 10:20 PM Re: Parting out two 88's [Re: 88blue90black]
neroco2 neroco2 Member Registered: 04/17/07 Posts: 31	Hello. I need the following: For my 1988 Red w/gray interior. In the engine compartment there is a black plastic cover with two plastic turnable pins toward the windshield, the wiper motor is underneath. I need a plastic pin and the metal support under the plastic piece that the pin fits into (drivers side). Center console cover even if it's not gray I might be able to change the color. Rear floor compartment latch/lock unit. Drivers side red tail light lens. For my 1989, blue w/blue interior, 2 rear floor compartment latch/lock units. Plastic engine cover. For my 1991 red w/tan interior, Drivers seat metal plate that says Thigh/recline/lumbar for the power switch unit, the unit is there but the metal plate is missing. And a power antenna. Your help is much appreciated. Neroco2
Top

#489974 - 02/25/08 04:51 PM Re: Parting out two 88's [Re: 88blue90black]
Jim ND IN Jim ND IN Member Registered: 02/25/08 Posts: 99	i need the driver's side seatbelt receiver that bolts to the floor behind the seat near the center console. let me know if you still have this piece available and what you would like to get out of it. thanks _________________________ 1990 Reatta Coupe
Top

#490220 - 02/26/08 01:49 PM Re: Parting out two 88's [Re: Jim ND IN]
Jim ND IN Jim ND IN Member Registered: 02/25/08 Posts: 99	i also would kind of like the piece of chrome trim that goes at the bottom of the windshield. let me know, thanks _________________________ 1990 Reatta Coupe
Top

#508030 - 05/07/08 02:04 PM Re: Parting out two 88's [Re: Jim ND IN]
Charles Cooper Charles Cooper New Member Registered: 05/07/08 Posts: 2	Dear Sir: I do not know if you still have body parts of the 88 reatta, but I need the hood! Or if you know where I can get a hood for the 88 reatta, I would appreciate any information you can give.
Top

#508350 - 05/08/08 05:55 PM Re: Parting out two 88's [Re: 88blue90black]
gpete51 gpete51 New Member Registered: 05/08/08 Posts: 2	I need a gas fill pipe do you have one in good shape?
Top

#508388 - 05/08/08 10:15 PM Re: Parting out two 88's [Re: gpete51]
Jim Jim Member Registered: 11/20/99 Posts: 1157 Loc: Duluth Mn	If the originator of this thread does not have the parts for the last two posts, I do. I can be reached at jfinn@cpinternet.com and please include your zip code for shipping purposes. I have several hoods and may have the right color. Jim
Top

Page 2 of 3

Previous Topic View All Topics

Hop to:

Generated in 0.075 seconds in which 0.006 seconds were spent on a total of 13 queries. Zlib compression enabled.