25249 Members
87 Forums
114565 Topics
508023 Posts
Max Online: 479 @ 03/26/08 04:18 PM
|
|
|
Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be
FOUND HERE!
|
|
|
#467262 - 11/26/07 09:36 PM
1970 442 brake master cylinder
|
57chevymike
Member
Registered: 07/26/07
Posts: 13
|
I SURE COULD USE SOME HELP...I HAVE A 1970 442 NON POWER FRONT DISC BRAKE CAR...CAN I USE A POWER MASTER CYLINDER..OR A MASTER FROM A NON POWER DRUM BRAKE CAR..OR ARE THEY ALL THE SAME..SOMEONE GAVE ME A NUMBER OF 5470409 AS THE CORRECT MASTER..IF SOMEONE HAD THE MORAINE BOOK TO CHECK THIS OUT..MAYBE SOMEONE HAS A 70 NON POWER BRAKE CAR THAT CAN HELP....IF I HAD THE OLD ONE IT WOULD HELP..THE CAR HAS AN AFTER MARKET WITH A BOLT IN THE MIDDLE OF THE CAP WHICH IS THE WRONG MASTER..THE CORRECT MASTER HAS DUAL BLEEDERS AND A SINGLE BAIL ALSO NEED THE HOLD OFF VALVE... THANKS FOR THE HELP WITH THE REAR BUMPER IT WAS LOCATED IN FLORIDA
|
|
Top
|
|
|
|
Moderator: rocketraider, R W Burgess, 24T42, Peter J.Heizmann, Steve Moskowitz, Brenda Shore, gagliaj
|
