|
|
|
Chrysler's TC by Maserati
|
|
Re: TC fuel pump
by
car_chick
05/10/08 10:37 PM
Some pumps are more prone to failure than others. GM Truck and SUV fuel filters are notorious for failing.
I had my LeBaron with the 2.2L turbo engine for 233,000 miles and never replaced either the turbo or the fuel pump. I did always us
|
|
|
Me & My Car
|
|
|
Re: 1912 Buick Model 36 Where is it now?
by
56Roadmaster
05/10/08 09:58 PM
Dave,
I still have not found the number, do you have one of these cars? The exhaust system was even salvagable on the one I had.
Scott
|
|
|
Chrysler/Mopar - Buy/Sell
|
|
|
Re: 1941 Chrysler Royal for Sale
by
mopar380
05/10/08 09:48 PM
PLEASE re-read the post, it says DO NOT REPLY but contact the person directly. IT is NOT my car. I only have posted the information here.
|
|
|
Buick Reatta
|
|
|
Ford and Mercury - 1954 and Newer
|
|
|
Re: 54 Mercury engine swap
by
junkyardjeff
05/10/08 09:16 PM
A 390 will bolt in using the Y block mounts,I think they need to be reversed or swapped sides. If you use a 390 you could use your original trans if you use a 58 to 64 bellhousing but you might have to use the starter and flywheel for those years of
|
|
|
CCCA - General
|
|
|
'37 supercharged Cord Phaeton toy
by
Su8overdrive
05/10/08 08:17 PM
Pardon my not having a photo. I'm trying to help a friend who has an approximately 1/24th or 1/25th scale, red pliable rubber 1937 Cord Phaeton molded with top up. Black rubber wheels on pair of steel pin axles clipped into place. Other than the whee
|
|
|
Garage Forum
|
|
|
Re: Compressor Question
by
Steve_Mack_CT
05/10/08 07:40 PM
Thanks guys - actually found my manual and yes, it says to drain it.
Thanks, Steve
|
|
|
Franklin
|
|
|
Re: Engine Rebuilders and Babbit Work
by
mikewest729
05/10/08 07:30 PM
Barry cam is the very good and reasonable for the cam shaft(tom will give you his info) I have severa engines and parts if you find something you need. 585 738 1541 mike
|
|
|
Trailer & Towing Forum
|
|
|
Re: Do I need Stabilizer Bars?
by
Paul Dobbin
05/10/08 05:29 PM
Charlie,
That big dually may have had negative tongue weight or been close to a balanced trailer. Either one can cause the trailer to first push the rear wheels of the tow vehicle down, which in turn lifts the traction to the two front wheels t
|
|
|
Ford Model A
|
|
|
Chrysler's TC by Maserati
|
|
|
Re: 1991 Chrysler TC by Maserati For Sale
by
Jeffn
05/10/08 02:06 PM
Originally Posted By: Lee_Mi've got my eye on 2 1966 sunbeams, that if i get my wish, i will be adding to my 'stable'. if that is so, the TC may have to go.
)
trading away italian art for old english steel...
I don't think
|
|
|
BCA - Buy/Sell
|
|
|
WTB: Photographs of 1959 Buick Professional Cars
by
Silver Arrow
05/10/08 02:05 PM
Desire photographic evidence of 1959 Buick Taxi-Cabs, Fire Chief Cars, Police Cruisers, Airport Limousines, along with any photos of 1959 Buick Hearses and Ambulances in use. Will purchase or compensate you for your time and expenses incurred in rep
|
|
|
Books, Magazines & Literature
|
|
|
BCA - Buy/Sell
|
|
|
Quick Question
by
john_kremer
05/10/08 12:53 PM
Hi, I have a 1983 Buick riviera that is in decent condition.
I am not looking to sell it here, but was wondering how much its parts copuld fetch - mainly the power seats, doors, floor pans, radio, hood, trunk, power accessories, etc.
It has
|
|
|
General Discussion
|
|
Re: Electric Windshield Wipers
by
AWBE
05/10/08 12:52 PM
Thanks to both you guys-----I will send him a spare I have.
I had the one on my car rebuilt about 7 years ago and it works----but not very well. I may not be getting enough vacuum to it. I think I have all the lines hooked up properly---using
|
|
|
Buick Reatta
|
|
|
Re: removing radio from 89 Reatta
by
Ronnie
05/10/08 12:50 PM
Originally Posted By: PARI have a hum in my 89 Reatta radio, I have been told it is the amp. Where do I find the amp. and radio, and how do I get it out.
Here is the info you need.
Good Luck!
|
|
|
Plymouth
|
|
|
1948 Plymouth Coupe for sale
by
woodythx138
05/10/08 12:27 PM
This is a very nice plymouth coupe, was restored all around a couple years ago ,fresh engine and trans and interior, runs great and is a real eye catcher were ever it goes.
E-mail me at jazzy51@mlode.com or call me at 209-532-8935 or you can cal
|
|
|
Studebaker and Erskine
|
|
|
Still Need 34/35 Stude Tail Lights!!!
by
johnjb
05/10/08 12:15 PM
I really need Tail Light(s) for a 34 or 35 Stude Dictator. If you have one or two please let me know or call 206-909-6685
Thanks, John
|
|
|
Chrysler - General Discussion
|
|
|
Re: 1960 Chrysler New Yorker Parking brake adj. tool
by
Don Jr.
05/10/08 12:01 PM
I recieved a new number for the Adjusting tool for the parking brake on a 1960 Chrysler New Yorker. It is Snap on # S9481 A , Chrysler # C3723, #C3015. If anyone has information where I can find one please let me know, Thanks Don
|
|
|
Buick Reatta
|
|
|
Buy/Sell
|
|
|
1963 Buick riveria for sale
by
brad L
05/10/08 11:40 AM
I have a 63 riveria for sale 2 owner car.Nice clean original condition.Never been taken apart.She runs and drives.Needs rust repair in lt ft floor,rt side rockers, trunk is solid.Red Leather interior nice condition.
$4500 or trades consider.Tha
|
|
|
General Discussion
|
|
|
Re: Where can I buy Dropped Spindles for a 50 Buick?
by
Peter Gariepy
05/10/08 11:31 AM
Curt,
Yup, you can get what you need at http://www.fatmanfab.com
I am the founder and webmaster here and I'm glad you joined us! This forum is primarily focused on restoration but you are welcome here. I apologize if a few jer
|
|
|
Packard
|
|
|
Re: Carburetor ID
by
Speedster
05/10/08 11:18 AM
LOL A good Cartoon is always the best way to get the Idea across.
|
|
|
BCA - Buy/Sell
|
|
|
Buy/Sell
|
|
