|
|
|
Chrysler's TC by Maserati
|
|
Yea me too. I hope to have it in my garage one day. Jasper
|
|
General Discussion
|
|
John, Sounds to me like the gauge sensor circuit is grounding someplace on the cluster. Specifically, the lead from the tank sensor actually provides a ground via the tank sensor float. To troubleshoot I'd try the following: 1. Disconnect the ta
|
|
Buick Reatta
|
|
There is a bearing supporting the clutch that could be locked up.
|
|
Riviera Owners Association
|
|
Hi Everyone, Mr Riviera, Dick Sweeney, is a believer in Ford Green as a close match for the Buick Green. In BCA 400 point judging, he has not had an issue with the color, and has the trophies to back it up! All that being said, I do try to support
|
|
OCA - Buy/Sell
|
|
anyone?
|
|
Dodge & Dodge Brothers
|
|
My reference book says: Serial numbers =4015051-4276687 Engine numbers= D2-1001-D2-266089 Two passenger coupes made =32,952 Two/four passenger rumble seat coupe=4,317 Covertible coupe 2/4 passenger=1,525 All are Series D2 (1936) Any other questions?
|
|
Riviera Owners Association
|
|
Dave, A smooth dash, 120 MPH speedometer and a 425 would certainly make this one rare Riviera. Tim
|
|
British (MG, Triumph, Jaguar, etc.)
|
|
This vehicle, believe it or not is actually a 1946 1800 Saloon. I was told the wheelbase is about 2" shorter than the 1947-1948 2000 Renoun (I could be mistaken). I was told by a triumph club in England that have been keeping track of the data
|
|
Chevrolet
|
|
Your local NAPA/etc. parts store will have the correct oil for your system. It's readily available. Wayne
|
|
Lincoln-Zephyr
|
|
10 years ago they were $250. /pair.
|
|
Chrysler/Mopar - Buy/Sell
|
|
Where is it located & what auction site? How much?
|
|
Chrysler/Mopar - Buy/Sell
|
|
Do you have any pix? where are they located & how much?
|
|
Buick Reatta
|
|
If the second set of custom coils doesn't work, I'll cut one coil off the Intrax springs and reinstall them. They lowered the front about an inch while maintaing about the same spring rate as stock. The cut should take care of the extra inch. It wi
|
|
Buy/Sell
|
|
I would like to buy a Ford model N, R, or S or any parts you might have. I prefer an original unrestored or older restoration car, but will consider all offerings. Please let me know what you have for sale. You can reach me via email at pai01@aol.com
|
|
Chrysler's TC by Maserati
|
|
Tony, Yes, lube the pull down points and pivoting parts of the mechanisim with a dry film lubricant (like PB Blaster's) But it does sound like you need an adjustment. The entire pull down assembly (motor and frame) can be slid up/down (or forward b
|
|
Legislation
|
|
Originally Posted By: OldsfanWe'll find out. I just sent the paperwork to the state as a normal transfer. Pictures were required with the antique form, but I just did an MV-4 like a regular title and tag transfer using the title and transfer fees fro
|
|
Buick Reatta
|
|
Connections, and the power to the screen would be my first checks. Is it just the display? I mean does the touch portion work?
|
|
Buy/Sell
|
|
bump
|
|
BCA - General
|
|
Frank, Glad to see that you got the '40 back together. If we do not see you Thursday, we'll see you bright and early on Friday at the breakfast. Drive safely. stevo
|
|
Dodge Trucks
|
|
I have a 1940 dodge....and also may have an extra set of rims that have the clips. Where are you located?
|
|
Pontiac Flathead Owners
|
|
Any chance you could attach a photo? That would help me see what the problem is. Thanks.. Lukey
|
|
BCA - Buy/Sell
|
|
Hi guys, new to the site and just purchased a 57 Riviera Super that has a broken screen. Does anyone have ideas as to a good place to get a replacement?? Thanks,Chris.
|
|
General Discussion
|
|
Thank you Mark and others, you gave me quite some good ideas! Re-install the body is a good one, strapping the frame must be very easy. It's nice to have so many friends who help you out on a distance! Will let you know what happens.
|
|
Dodge & Dodge Brothers
|
|
thanks for you help guys, one of my scribbled notes says only, aaca berkshires august 4-7 . i don't recall where i obtained this info and i may have assumed it was a dodge event, sorry for the confusuion. no one has replied to my other question about
|
|
BCA - General
|
|
Bump
|
