|
|
|
Dodge & Dodge Brothers
|
|
Thanks John ( & the rest here), that answered that. I assumed the rod probably turned, but thought there might be a smaller rod inside to the rheostat. Multimeter shows I'm getting connection to the unit. Found a guy that is familiar with this
|
|
Buick - Post War
|
|
Thanks Dave, a huge help. We won't be pulling the engine/trans until later this month, and will see what we find.
|
|
Buick Reatta
|
|
Kit, I ordered a balancer from a vendor on e-Bay a couple of years ago, it seems there's a difference in width in some, at any rate, the one I ordered (not from the vendor you're talking about) was too narrow. It's good they show the width measureme
|
|
Buy/Sell
|
|
Rear wheel bearings to repair worn axles. Fits ford and gm, findme at hershey c3b 6-10
|
|
Graham & Paige
|
|
Wow, thanks for the wealth of information you have given me. I've attached a few photos of this old car to give you an idea of what this Graham is like. As soon as we can get a clear title the restoration work will begin. First thing is to refinis
|
|
Ford, Edsel & Mercury - 1954 and Newer
|
|
Forgot to add that it is a convertable.
|
|
Buy/Sell
|
|
A friend of mine is selling finders, doors, and body. All came from a 1929 Model A Ford. There are a set of doors from a sedan. They are in fairly good condition. $1,400 for all 4 doors. Finders are in ok condition. They all need some work. $300
|
|
Buick - General
|
|
Just a reminder to get your registrations sent. We need a head count for the awards banquet. Good weather and fun is a guaranteed. Willie
|
|
Our Cars & Restoration Projects
|
|
Hi Dean, Its great to see your progress and you are realll getting on with the job. I was wondering if you had any measurements of the timber bearers you replaced? It would be really helpful if you recoreded some detail before replacing them?
|
|
General Discussion
|
|
Driving into work this morning I saw a fair amount of old cars parked at the Hershey Lodge, also a few rain drops hit the windshield. Yesterday was a perfect day. Checking the forecast the weather predictions seem to change every other day. Yesterday
|
|
Technical
|
|
My first question is along the lines of Bob Kerr's: check the material composition. Think about what material they would have access to in the 1920's. Is it possible this could be thick and aged leather, like they wrap around lap robe bars in a touri
|
|
Buick Reatta
|
|
Walt,,,, Maui's referenced site/covers doesn't look bad.... Understand you don't want to lay out a lot of $, but check out the below referenced site for grins anyway. I had my 90 coupe wheel recovered for 250.00 + 30.00 (both ways) shipping....abs
|
|
Buy/Sell
|
|
I have 6 1940s PA. lic. plates. Find me at chocolet field,c3b 6-10
|
|
Buick Riviera - Riviera Owners Association
|
|
What year is the car and what is your budget? To blast a frame that has significant scale rust requires a very large commercial type compressor, blaster, safety equipment, and it makes a big mess. If the frame has scale rust, it needs to be removed
|
|
Buick Riviera - Riviera Owners Association
|
|
there's no way cars like that would be road legal here in germany ... i personally like any convertible "modification" more than making the rivi a "rivamino".
|
|
Buick Riviera - Riviera Owners Association
|
|
hi chris. problems on my 65 rivi (116K miles) where: sheet metal: rear window (as mentioned above take a detailed look into the trunk and inspect the interior compartement in that area); A-pillar area (interior & exterior); front edge of the hoo
|
|
CCCA - General
|
|
I don't think this will make much difference either way - except that now the board will have to find something new to have endless discussions about! I guess it came up about 4 or 5 times in the years that I was on the committee. There are a lot of
|
|
Dodge Trucks
|
|
I didn't think they had a rear bumper , or did they ?
|
|
Technical
|
|
Greetings from New zealand Iam in the final stages of restoring our 58 deville coupe and the double s shaped spring the holds the ash trays closed is a headache as to how they are fitted I have all the components but lack the knowledge to fit them if
|
|
What is it?
|
|
Any ideas what these vehicles are? 1. 2. 3. 4. 5. More vehicles can be viewed here: http://www.imcdb.org/movie_26393--G--Men.html
|
|
Buy/Sell
|
|
would you have a pair for a 39 DeSoto
|
|
Technical
|
|
i live n tucson arizona ill try a weldin place tomorrow n ill keep u posted k thank you.
|
|
Chrysler/Mopar
|
|
Hi, I've posted more pics here http://photos.aaca.org/ Just search for 1930 chrysler and you should find them ok. If you require any specific shots, just let me know and I'll tak
|
|
Buy/Sell
|
|
Sold. Thanks!
|
|
What is it?
|
|
Sounds like a good deal to me. Go get em while they last! GT Rfd, Ill. BCA #11974
|
