I am looking for parts for a Model 900 Convertible coupe and a 1207 Victoria.

For the Model 900 I need a rumble seat step for the right rear bumper.

I need to find a 30 gal. fuel tank for the 1207. It would be nice to find a refurbished unit or one that is in solid condition. This is needed to replace a tank that was cleaned and "sealed" in the eighties.

Peter Tacy
Vintageride@gmail.com

A couple weeks ago I was at my friend Bob's and identified this step for him in his piles of stuff. Real nice original - definitely correct with Packard number cast underneath. Good lines and definition on top. It has one minor issue, one of the two mounting bosses underneath was damaged, probably by trying to remove a stuck bolt. Should be a reasonably easy aluminum weld, shape, cleanup and tap so you can sleep well at night. email bob.wotkowski@verizon.net and tell him its the step the Flackmaster identified for him. Good Luck!

Does your 900 have sidemounts or a rear mount spare? The rumble seat step on the bumper is different depending on where the spare(s) is/are mounted. In either case I can likely help you out. Send a pm if interested.

Thanks for the responses.

The 900 is not sidemounted. The spare is mounted on the rear of the car.

Peter

Then you need Rumble seat step part # 199000. I will check this evening, I likely have one if you're interested. Part # 199772 is for sidemounted cars.

One down, one to go.

I have located a rumble seat step for the 900.

Many thanks to those who helped.

Peter Tacy

Is the gas tank 25 or 30 gal?

It will require a 30 gallon tank.

Hi Peter, I have a 30 gal tank that I puchased as a spare for my 35 12, but if you need it, send me an email. packard12s@hotmail.com