|
|
#516810 - 06/13/08 11:05 PM
Looking for 49 Roadmaster parts
|
Member
Registered: 06/13/08
Posts: 11
|
I am looking for the red plastic inserts for the monogram on the trunk lid for a 1949 Roadmaster that say "Dyna" and "Flow" If I can't find those I will take the stick shift model inserts that say "Buick" and "Eight." I am also looking for a complete lock assembly and retainer for the same car. Thanks
|
|
Top
|
|
|
|
#516832 - 06/14/08 01:09 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 02/21/08
Posts: 43
Loc: California
|
These emblems are not being reproduced. The only way to get them is by waiting and looking around. Recently, NOS "Buick-Eight" emblems sold on ebay for well over $200 for EACH side! That's right, it came to about $500 for the pair.
I think if someone could manufacture these pieces as reproductions, they could sell a bunch. Any takers?
_________________________
1949 Buick Super Convertible
|
|
Top
|
|
|
|
#516885 - 06/14/08 10:41 AM
Re: Looking for 49 Roadmaster parts
[Re: galenmd]
|
Member
Registered: 06/13/08
Posts: 11
|
Hoofah!! Good luck to me huh?
|
|
Top
|
|
|
|
#517390 - 06/17/08 09:58 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 06/13/08
Posts: 11
|
This might be harder than I thought......
|
|
Top
|
|
|
|
#517838 - 06/18/08 10:21 PM
Re: Looking for 49 Roadmaster parts
[Re: Mark Shaw]
|
Member
Registered: 06/13/08
Posts: 11
|
No dice, but thanks a lot for the tip.
|
|
Top
|
|
|
|
#518055 - 06/19/08 10:47 PM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 10/27/05
Posts: 1546
|
Nick, I'm restoring a 49 Roadmaster too, so I probably need these. Anybody else? If so, if we can get a few folks that need these, then I will find someone to make them.
Email me direct at abc.moran@netzero.net or at work bryan.moran@wellsfargo.com
All that are interested - and if we can get the price down, and I can make a few extra to sell, I'll do it.
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518572 - 06/22/08 05:13 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Member
Registered: 08/03/07
Posts: 23
Loc: CT, USA
|
One company does make the "Dyna Flow" emblems for the '49 Roadmasters and any Supers equipped with the Dynaflow transmission. They are $225.00 each, but look great. Here is the link. http://www.emblemagic.com/buick_emblems.htm
_________________________
Tony's Buick '49 Buick 56S Super Sedanette w/Dynaflow
|
|
Top
|
|
|
|
#518737 - 06/23/08 12:01 PM
Re: Looking for 49 Roadmaster parts
[Re: Tonys Buick]
|
Member
Registered: 10/27/05
Posts: 1546
|
Wow! $450 a set. Now you know why the restoration hobby is so expensive, and is becoming a smaller community.
I also need th sill plates, and I see a regular ebayer that is involved in the Buick parts community offering them for $400 a pair, so right there you have basically two trim peices, very necessary as they are - resulting in a $900.00 expenditure after shipping.
That is why 4 door models are kind of hard to choose as a restoration project. It costs the same to restore a four door sedan as it does a convertible.
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518741 - 06/23/08 12:14 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Long Time Member
Registered: 03/11/00
Posts: 2642
Loc: Austin, Texas
|
You might try Mike Gadaleto at 1-215-736-3432 for your door sills. He did a set for my wagon at about 250 bucks. This was a while ago so prices may have changed.
_________________________
Bill 1950 Buick Super Estate Wagon 1947 4 Door Sedan 1964 Riviera
|
|
Top
|
|
|
|
#518828 - 06/23/08 04:28 PM
Re: Looking for 49 Roadmaster parts
[Re: Bill Stoneberg]
|
Member
Registered: 10/27/05
Posts: 1546
|
Bill, Good looking and correct?
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518922 - 06/23/08 09:31 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Long Time Member
Registered: 03/11/00
Posts: 2642
Loc: Austin, Texas
|
Yes, Good looking and correct.
He is the person who builds them for the other vendor.
Expect to wait a while though.
Bill
_________________________
Bill 1950 Buick Super Estate Wagon 1947 4 Door Sedan 1964 Riviera
|
|
Top
|
|
|
|
#519053 - 06/24/08 11:06 AM
Re: Looking for 49 Roadmaster parts
[Re: Bill Stoneberg]
|
Member
Registered: 06/13/08
Posts: 11
|
Beautiful! I didn't think anyone made those. I don't know if I want to spend that much, but you never know.
|
|
Top
|
|
|
|
#519578 - 06/26/08 04:38 PM
Re: Looking for 49 Roadmaster parts
[Re: Tonys Buick]
|
Member
Registered: 06/13/08
Posts: 11
|
One company does make the "Dyna Flow" emblems for the '49 Roadmasters and any Supers equipped with the Dynaflow transmission. They are $225.00 each, but look great. Here is the link. http://www.emblemagic.com/buick_emblems.htm I talked to these guys and they won't be making them for another year. Also tried to haggle with them on the price but they said the price is the price.
|
|
Top
|
|
|
|
#519883 - 06/28/08 09:04 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 10/27/05
Posts: 1546
|
Nick,
Sorry for your experience but consider this a "Soup Nazi" warning. I have found when someone has something you want (desperately) they set the price and you comply or "no emblem for you".
OK, I need to go get my fresh organic strawberries from the "Strawberry Nazi" and I won't say a word....
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
|
The last of the special built pedal cars will be going up for sale at the RM Auctions in Scottsdale in January. Built by the renown restorer Fran Roxas, this "Dusey" is truly is another work of art.
|
|
27742 Members
92 Forums
122444 Topics
551149 Posts
Max Online: 479 @ 03/26/08 04:18 PM
|
|
|
Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be
FOUND HERE!
|
|
|