|
|
#516810 - 06/13/08 11:05 PM
Looking for 49 Roadmaster parts
|
New Member
Registered: 06/13/08
Posts: 7
|
I am looking for the red plastic inserts for the monogram on the trunk lid for a 1949 Roadmaster that say "Dyna" and "Flow" If I can't find those I will take the stick shift model inserts that say "Buick" and "Eight." I am also looking for a complete lock assembly and retainer for the same car. Thanks
|
|
Top
|
|
|
|
#516832 - 06/14/08 01:09 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 02/21/08
Posts: 43
Loc: California
|
These emblems are not being reproduced. The only way to get them is by waiting and looking around. Recently, NOS "Buick-Eight" emblems sold on ebay for well over $200 for EACH side! That's right, it came to about $500 for the pair.
I think if someone could manufacture these pieces as reproductions, they could sell a bunch. Any takers?
_________________________
1949 Buick Super Convertible
|
|
Top
|
|
|
|
#516885 - 06/14/08 10:41 AM
Re: Looking for 49 Roadmaster parts
[Re: galenmd]
|
New Member
Registered: 06/13/08
Posts: 7
|
Hoofah!! Good luck to me huh?
|
|
Top
|
|
|
|
#517390 - 06/17/08 09:58 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
New Member
Registered: 06/13/08
Posts: 7
|
This might be harder than I thought......
|
|
Top
|
|
|
|
#517838 - 06/18/08 10:21 PM
Re: Looking for 49 Roadmaster parts
[Re: Mark Shaw]
|
New Member
Registered: 06/13/08
Posts: 7
|
No dice, but thanks a lot for the tip.
|
|
Top
|
|
|
|
#518055 - 06/19/08 10:47 PM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 10/27/05
Posts: 1485
|
Nick, I'm restoring a 49 Roadmaster too, so I probably need these. Anybody else? If so, if we can get a few folks that need these, then I will find someone to make them.
Email me direct at abc.moran@netzero.net or at work bryan.moran@wellsfargo.com
All that are interested - and if we can get the price down, and I can make a few extra to sell, I'll do it.
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518572 - 06/22/08 05:13 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Member
Registered: 08/03/07
Posts: 23
Loc: CT, USA
|
One company does make the "Dyna Flow" emblems for the '49 Roadmasters and any Supers equipped with the Dynaflow transmission. They are $225.00 each, but look great. Here is the link. http://www.emblemagic.com/buick_emblems.htm
_________________________
Tony's Buick '49 Buick 56S Super Sedanette w/Dynaflow
|
|
Top
|
|
|
|
#518737 - 06/23/08 12:01 PM
Re: Looking for 49 Roadmaster parts
[Re: Tonys Buick]
|
Member
Registered: 10/27/05
Posts: 1485
|
Wow! $450 a set. Now you know why the restoration hobby is so expensive, and is becoming a smaller community.
I also need th sill plates, and I see a regular ebayer that is involved in the Buick parts community offering them for $400 a pair, so right there you have basically two trim peices, very necessary as they are - resulting in a $900.00 expenditure after shipping.
That is why 4 door models are kind of hard to choose as a restoration project. It costs the same to restore a four door sedan as it does a convertible.
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518741 - 06/23/08 12:14 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Long Time Member
Registered: 03/11/00
Posts: 2573
Loc: Austin, Texas
|
You might try Mike Gadaleto at 1-215-736-3432 for your door sills. He did a set for my wagon at about 250 bucks. This was a while ago so prices may have changed.
_________________________
Bill 1950 Buick Super Estate Wagon 1947 4 Door Sedan 1964 Riviera
|
|
Top
|
|
|
|
#518828 - 06/23/08 04:28 PM
Re: Looking for 49 Roadmaster parts
[Re: Bill Stoneberg]
|
Member
Registered: 10/27/05
Posts: 1485
|
Bill, Good looking and correct?
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
#518922 - 06/23/08 09:31 PM
Re: Looking for 49 Roadmaster parts
[Re: BJM]
|
Long Time Member
Registered: 03/11/00
Posts: 2573
Loc: Austin, Texas
|
Yes, Good looking and correct.
He is the person who builds them for the other vendor.
Expect to wait a while though.
Bill
_________________________
Bill 1950 Buick Super Estate Wagon 1947 4 Door Sedan 1964 Riviera
|
|
Top
|
|
|
|
#519053 - 06/24/08 11:06 AM
Re: Looking for 49 Roadmaster parts
[Re: Bill Stoneberg]
|
New Member
Registered: 06/13/08
Posts: 7
|
Beautiful! I didn't think anyone made those. I don't know if I want to spend that much, but you never know.
|
|
Top
|
|
|
|
#519578 - 06/26/08 04:38 PM
Re: Looking for 49 Roadmaster parts
[Re: Tonys Buick]
|
New Member
Registered: 06/13/08
Posts: 7
|
One company does make the "Dyna Flow" emblems for the '49 Roadmasters and any Supers equipped with the Dynaflow transmission. They are $225.00 each, but look great. Here is the link. http://www.emblemagic.com/buick_emblems.htm I talked to these guys and they won't be making them for another year. Also tried to haggle with them on the price but they said the price is the price.
|
|
Top
|
|
|
|
#519883 - 06/28/08 09:04 AM
Re: Looking for 49 Roadmaster parts
[Re: Nick_Toth]
|
Member
Registered: 10/27/05
Posts: 1485
|
Nick,
Sorry for your experience but consider this a "Soup Nazi" warning. I have found when someone has something you want (desperately) they set the price and you comply or "no emblem for you".
OK, I need to go get my fresh organic strawberries from the "Strawberry Nazi" and I won't say a word....
_________________________
Bryan "Jake" Moran
|
|
Top
|
|
|
|
|
27093 Members
90 Forums
120549 Topics
539723 Posts
Max Online: 479 @ 03/26/08 04:18 PM
|
|
|
Lost your password? Can't remember your username? Having registration problems? Answers to many of these problems can be
FOUND HERE!
|
|
|