Would you be interested in an oil bath air cleaner that mounts on the 3 head bolts with a pipe going over from the top of the air cleaner to the top of the carburetor. The pipe is 2 1/2 inch diameter. The filter is aproximately 7 inches in diameter and 12 inches high. It comes apart about 2/3 of the way down with some wing head screws. This one is dirty but not dented. I have heard them called West Texas air cleaners. Supposedly there was a lot of dust blowing around there and these were used instead of the standard air cleaner. I want $50.00 for it because even though it needs to be cleaned up, it has the pipe and clamps with it.
I also have one of the small air cleaners that fit on the carburetor for $30.00. This one is correct but someone took the ridges out of the top and it is now smooth. It is clean.