|
|
|
Chrysler's TC by Maserati
|
|
The distributor is most easily accessed from underneath the car, with the car on a lift. I remove the oil filter and have decent access that way to do any work necessary. The one thing doing it this way, you have to do everything by feel. BTW, I DO
|
|
What is it?
|
|
Yes its Albro/Schiefer aluminum bronze face, initially though Flat Ford but they have 2 guide pin holes where this only has 1. Center opening to large and tooth count all say no.
|
|
Chrysler's TC by Maserati
|
|
Alan is right again, much too much money asked for this job. Your engine has roller followers and some times, if a valve sticks or hangs open, the follower will be 'kicked' out of place. This however will not cause an engine knock which was what we
|
|
Buick Reatta
|
|
Hi Barney; I know that over recent months you have expressed an interest in increasing your mpgs. The EPA highway rating for my car is 28 MPG (US Gallon) the old EPA rating was 30 MPG (US Gallon) and we all know that he old EPA ratings were almost
|
|
Buick Reatta
|
|
Service and Owner Information > Buick > 1990 > Reatta > Shop/Service Information Narrow Search: All media types Paper Only CD ROM Only Is this the one you would want to order from HELM ? 1990 Riviera/Reatta Ser
|
|
What is it?
|
|
This appears to be an aluminum flywheel, right? If so that screams racing or high performance application. On a hunch I tried Googling "Albro aluminum flywheel" and turned up a bunch of hits for "hot" flathead Fords. I'm sure they
|
|
Chrysler's TC by Maserati
|
|
Car has been sold!!
|
|
Dodge & Dodge Brothers
|
|
I do not believe any paint company will have modern formulas for 70+ year paint. I know of a few car buffs having problems getting formulas for 1960's colours. What you can do, though, is to take paint chips of the colours you want to an outfit wi
|
|
Memorabilia and Printed Material
|
|
Love the mid-century modern style! Neat idea. Could you do the same thing with pictures or post cards??
|
|
Chrysler/Mopar
|
|
unless a lebaron is reaaly cheap i would pass.
|
|
Buick - General
|
|
Thanks Brian...that description sounds like what I have, but the tire shop said that if they put them on before putting the wheel on (I got them with an anti-theft strap that needs to be screwed on from the back), they couldn't get a wrench on them.
|
|
Buick - Buy/Sell
|
|
Just cleaning up the images so they show up in the post.
|
|
Packard
|
|
A friend of mine who has a standard trans in his '70 Challenger came over with some of his Pilot tools. What he saw was I did not have the clutch evenly centered. So we loosened up the nuts he slide his tool in he centered the clutch and then we tig
|
|
CCCA - Buy/Sell
|
|
Complete brass or bronze radiator and shell taken off 1918 Delage race car. Stored 80 years. $2500 .allaboutas@aol.com or 917 562 8369
|
|
Chrysler's TC by Maserati
|
|
My mother knocked the LF signal lens that mounts in the front bumper out the other day. Does anybody have one available that they can part with?
|
|
Buick Reatta
|
|
Rawja: Have you ordered (or anyone else reading this) this manual from Helm? I ask because they show it as available only as a reprint. I take this to mean that it may not be bound, but rather loose and would need a 3 hole binder. Also, is it comple
|
|
British (MG, Triumph, Jaguar, etc.)
|
|
I'm just about ready to bring my '77 B back to life. I've got the carb rebuilt and hoses routed but the ignition key won't turn! I've tried turning the wheel to unlock it but no luck. Any ideas ??
|
|
General Discussion
|
|
For anyone interested in a parts manual for the 1909 Maxwell Runabout Model L, I would be glad to send you a copy no charge via email. My grandfather used it to get parts for the Runabout he purchased new in 1909.
|
|
Buick - Post War
|
|
Quote: Thanks for posting this You're most welcome John. I posted it hoping it could help someone, and not to say "I'm so smart". I did find the problem only by a lucky twist of the inlet pipe........Bob
|
|
Chevrolet
|
|
GM part # 3718465 and 3718466. Never mounted, still in black primer. Always stored in a heated extra bedroom. I should have removed the cardboard wrapping sooner, one has light surface corrosion on top side. Tiny ding in the other. Photos availa
|
|
Buick Reatta
|
|
It's worth that much as a parts unit. You have everything you need to swap stuff to troubleshoot. It's less than a core charge. Steak
|
|
General Discussion
|
|
Originally Posted By: Dave@MoonI think eBay initiated a policy some years back against selling torn out pages, although I'm sure they can't catch all of them. For years the automotive literature site was polluted with people selling torn out section
|
|
Buick - General
|
|
Derek, as you know, the correct centers for '66 are the ribbed cones that were utilized for '66 - '70. Assuming that these are the reproduction centers you've purchased, they should work as long as your wheels are the correct style for '66 - '70 app
|
|
What is it?
|
|
Picture of the whole fender ?? 31-32 Chevy ?
|
|
General Discussion
|
|
If the ride is free with a wink and a small cash payment in a secret envelope, yes. BUT, if the car crashes, the bride's next of kin will surely have the "envelope" on camera for the judge! And your insurance company will have a copy of
|
