Kevin M Posted October 13, 2018 Share Posted October 13, 2018 I know my dashboard started shaking because the roads in my town are on par with Berlin in 1945. But I don’t know how to fix this without taking the whole thing out. And I’d prefer not to do that. I read the tutorial on Ronnie’s site. But I couldn’t figure out how to fix it without taking out the whole dash. It’s only loose by the windshield side of the passenger side. Picture is the area I’m talking about. Thanks all. Link to comment Share on other sites More sharing options...
DAVES89 Posted October 13, 2018 Share Posted October 13, 2018 If you make the puller as illustrated on Ronnie's site you can pull the dash up and see if the clips came off the tabs or if the tabs are broke. Be sure to use the measurements provided to pull at the right place. If the tabs are broken you are pretty much screwed and will have to replace the pad. If the clips are gone those are still available from any of the vendors on this site. Link to comment Share on other sites More sharing options...
NCReatta Posted October 13, 2018 Share Posted October 13, 2018 All you need to do is remove the defroster grille and tighten the T-15 screws. They get loose after 25 years. 1 Link to comment Share on other sites More sharing options...
DAVES89 Posted October 13, 2018 Share Posted October 13, 2018 That would be correct Marck but I am also looking at the leading edge of the dash pad as well. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now