wood lid in trunk

[47clubcoup]

i have a 47 lincoln zephyr club coupe. inside the trunk there is a hinged pice of plywood that covers the spair tire dose any one have the diagram or dementions of the wood im talking about??

[Tom_Overfield]

If you have one in the car, what can’t you measure that?

 

reguards Tom

[38ShortopConv.]

If yours is missing  why not just cut a piece of plywood the size and shape to fit in the recess?  over the spare tire and screw it to the hinges.  

[ralphnof49]

I can measure mine if you still need it.

[47clubcoup]

i dont have hinges in my car ,iv seen a picture of one trunk bord but could not see how it worked or was put together, sorry.

[ralphnof49]

The wooden board in the trunk has 4 parts made of 1/2 inch plywood. I will try to post pictures. Overall dimensions are 28 in front to bumper end, 43 1/2 side to side near seat and 45 3/4 at bumper end. The hinged part is 22 1/2 front to back and 31 " across. The board near the seat is 43 1/2" across and 5 1/4" wide. The side boards are wider at the back and curved. Width is 6 1/8' near seat and 7 1/4" at the back, the inside length is 23" and by the fenders it is 19 1/2" then curved over to the inside length. There are metal clips at the side of the center piece to keep it down. There is a strap with snaps to hold the board open. I have more pictures if you need and send me your email address

[Mssr. Bwatoe]

heres a nice shot of a 42 trunk