gord14080 Posted April 21, 2018 Share Posted April 21, 2018 I am installing The ac defuser the plastic piece that directs air to drivers side and Center vent ,what is the connection to the evaporator box ? plastic to metal doesn’t fit inside or outside,is there apiece that goes around this connection or how do I make this tight? Any help would be appreciated, sorry I am working on 65 riviera. thanks for any advice! Gordon Purves aka Gord 14080 thanks again. Link to comment Share on other sites More sharing options...
Jim Cannon Posted April 21, 2018 Share Posted April 21, 2018 Yes, there is a rubber sleeve. Excuse the mess on my bench. Link to comment Share on other sites More sharing options...
gord14080 Posted April 21, 2018 Author Share Posted April 21, 2018 Thanks very much,I don’t have that ,I will try a small lawnmower tire tube thanks again! gord 14080. Link to comment Share on other sites More sharing options...
kegart Posted April 21, 2018 Share Posted April 21, 2018 3 hours ago, Jim Cannon said: Yes, there is a rubber sleeve. Excuse the mess on my bench. Your bench looks clean compaired to mine. You can still see room for more stuff. 1 Link to comment Share on other sites More sharing options...
Jim Cannon Posted April 21, 2018 Share Posted April 21, 2018 I forgot to mention, the rubber sleeve is glued on to the evaporator housing. It slips over the plenum in the center. You can see a bit of a shiny strip near the rubber. Thats the glue. So when you install the evaporator, you slide the rubber up and over the center air distribution plenum and then place the support straps under the evaporator. Still a pain. You have A/C hoses already connected to the evaporator, so freedom of movement is restricted. Link to comment Share on other sites More sharing options...
gord14080 Posted April 21, 2018 Author Share Posted April 21, 2018 I tried to use a rubber tube but too tight,I will try the used parts dealers ,I found it in the manual finally,no an easy spot to work thanks again for reply Gordon Purves aka gord14080 Link to comment Share on other sites More sharing options...
abandg Posted April 25, 2018 Share Posted April 25, 2018 I probably have the piece of rubber you need. If interested let me know at abandg@aol.com. I will dig it out if you can't find what you need and will give you a price if I have it. Thanks Gene. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now