Cargirl Posted March 5, 2018 Share Posted March 5, 2018 Strange one here, I am missing a bolt on my car. There is a brace approx 12 inches long that runs from the back of the power steering support bracket, angles down and connects at what appears to be the intake manifold. I believe the brace provides stabilization to the power steering bracket. It appears to have never been put on at the factory because the paint is prefect where the bolt would have roughed it up. If anyone can provide info on what sort of bolt went here I would appreciate it. I can get a temporary bolt at Ace hardware till I can source the correct one later. Link to comment Share on other sites More sharing options...
Barney Eaton Posted March 6, 2018 Share Posted March 6, 2018 (edited) Attached picture shows brace and bolt in upper right. Ran out of time to go deeper, part number for bolt is 11507022 (8M 1.25 X 16) It appears to have a 13mm head .....should be easy to find a replacement at a Pick n pull on other 3800 engines Edited March 6, 2018 by Barney Eaton (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now