Mike Markin Posted February 11, 2018 Share Posted February 11, 2018 (edited) I am assembling/installing a part of my Hot air heater and have a couple of questions. 1. At the cowl - how does the defrost cable connect to the air regulators and is the cable secured to the left metal defrost tube after it comes out of the firewall? A picture from left and right would be really helpful. 2. Once the defrost tubes are center mounted and run into the firewall, are they secured inside in any way to keep them in place? 3. Regarding the heater port inside the cab: Is a gasket used when mounting the interior heater vent? 4. I have an electric motor for the hot air system but it is shot. Does someone sell these items or can they be rebuilt? If so, who might do that? The guy I took it to didn't want to work on it. Thanks for your help Mike Edited February 11, 2018 by Mike Markin Moved the question from front page (see edit history) Link to comment Share on other sites More sharing options...
Tom_Overfield Posted March 11, 2018 Share Posted March 11, 2018 Check with Herrel listed in sources, he has a 1940 Continental with a hot air heater I believe.. give him a call, I am sure he can answer your guestions. Tom Link to comment Share on other sites More sharing options...
19tom40 Posted March 12, 2018 Share Posted March 12, 2018 Most old heater blower motors can be repaired. The local generator shop did one for me, but all it needed was new brushes. Mac sells a universal 6 volt heater motor that may work for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now