36 Dictator 3A Coupe Posted January 18, 2018 Share Posted January 18, 2018 Before I start my 36 3A coupe for the first time how can I get the oil pressure to come up. Too cold and icy to pull it and I want to get it started. Any info will be helpful. Thanks, Dennis Link to comment Share on other sites More sharing options...
ols car dog Posted January 18, 2018 Share Posted January 18, 2018 I suggest you remove the spark plugs ,ignition off spin the engine over for 15-20 seconds on the starter.lf it doesn't spin fast enough to get a reading on your oil pressure gauge hook it up to 12 volts with Ignition Off.You should see oil pressure pretty quick. hope this helps Ken Link to comment Share on other sites More sharing options...
36 Dictator 3A Coupe Posted January 18, 2018 Author Share Posted January 18, 2018 Thanks Ken. I have tried the 6 volt and yes it didn't bring up the pressure. I didn't know if the starter could take 12 volt. I changed my 9N Ford tractor to 12 volt and kept the same starter. I will give that a try, but only for short periods. I thought about using 12 volt. Thanks, Dennis Link to comment Share on other sites More sharing options...
ols car dog Posted January 19, 2018 Share Posted January 19, 2018 Sounds like a plan!! Link to comment Share on other sites More sharing options...
Spinneyhill Posted January 19, 2018 Share Posted January 19, 2018 The most important thing is that you circulate oil and that should be happening. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now