sligermachine Posted June 12, 2018 Author Share Posted June 12, 2018 Today it is super hot almost 100 deg. so this summer I added a new face in my- living room , garage, hobby-room. It is powered to rotate while on, I have a lot of coolers and this one is sure to be my #1 and is super quiet you could still hear a pin drop in the room while it is running . Link to comment Share on other sites More sharing options...
sligermachine Posted June 12, 2018 Author Share Posted June 12, 2018 Made a new set of rubbers today .I just try to get something done each day . the soft rubber block was in the can I found them in . so cool just keep looking for the note that says OK KYLE this is the last part . 4 Link to comment Share on other sites More sharing options...
sligermachine Posted June 14, 2018 Author Share Posted June 14, 2018 well last time to adjust the fit and finish of the finished door frame I'm going to nail it I am done with this side .I took a bit off the corner and mid way up now the frame will not twist any more . wile I made the wood I had left the wood 1/8'' to tall all the way around to do this part here sand to fit the body I am proud of the finished work it should be real fast to paint not much wrong just block sand it all 5 to 10 times to get it spot on . paint it black to see the work real soon .--kyle Link to comment Share on other sites More sharing options...
sligermachine Posted June 14, 2018 Author Share Posted June 14, 2018 the helicopters that you have seen in your life how are most of them held together 90% glue the vibration is the utmost at take off I have built many . that is the new rivets to say the least. Hysol glue 8 -3/8-24 nuts to a steel sheet and bolt 500 hp. down . that is why I used glue when my kids, kids are playing on this car I will not care just let them have fun on it like all the rest of my cars . 1 Link to comment Share on other sites More sharing options...
sligermachine Posted June 28, 2018 Author Share Posted June 28, 2018 I relay enjoyed the nationals . lots of 1927's no 1925's 5 Link to comment Share on other sites More sharing options...
sligermachine Posted July 17, 2018 Author Share Posted July 17, 2018 the machine shop is so hot and busy at this time of year don't have any get up and go left at 110 deg long days just bring me to a cooler month and we will start a gin . Link to comment Share on other sites More sharing options...
sligermachine Posted October 4, 2018 Author Share Posted October 4, 2018 No time yet but a lot closer than i was . my Buick is calling me .!!!! 2 Link to comment Share on other sites More sharing options...
Glen Duxbury Posted November 15, 2018 Share Posted November 15, 2018 Been reading sligermachine forums wood topics. I have a 26 Buick Standard 4dr and like everyone else the wood is bad. You mentioned that you had paper patterns. I’m hoping the bottom body frame and cowl patterns would work for my sedan. Most of the rear body is intact and I can copy that. Do you think you could help or know anyone who could. Be happy to buy patterns it would sure make it easier. This was my dads car he bought in 63. My name is Herb. Thanks Link to comment Share on other sites More sharing options...
sligermachine Posted January 1, 2019 Author Share Posted January 1, 2019 I have been real busy . as my son has handed back the machine shop back to me . I will soon be back at It fixing my 1925 just a little bit more to change and i will have time for my hobby's a gin --Kyle I have been cleaning my machine shop up 50 Ton of left over shafts and steel plate i have took to the scrap yard in the past 2 month . Man the price so steel is down to nothing and the price of steel went up 400 percent in the last 6 weeks . I cant wate till are steel foundry's are up and running it will help a lot . Link to comment Share on other sites More sharing options...
sligermachine Posted January 1, 2019 Author Share Posted January 1, 2019 IN 2 weeks I plan on being back working on my car . AT that time i will reply to the 80 questions on my tab at top of page to day i dont have time . KYLE 1 Link to comment Share on other sites More sharing options...
ROD W Posted January 1, 2019 Share Posted January 1, 2019 Kyle, Get back to work on that 25. Remember where not getting younger. 1 Link to comment Share on other sites More sharing options...
sligermachine Posted July 28, 2020 Author Share Posted July 28, 2020 On 4/15/2018 at 1:02 PM, Larry Schramm said: hi man i can not belive it has took so long to get back to my project . God willing i would like to build a new shop where ? next to new house not yet built that way i can get back to restoring some more old Buicks 1 Link to comment Share on other sites More sharing options...
sligermachine Posted July 28, 2020 Author Share Posted July 28, 2020 On 1/1/2019 at 3:22 PM, ROD W said: Remember where not getting younger. i know its time to slow down quit working 100 hr. per week 10 weeks in a row Link to comment Share on other sites More sharing options...
Rod Wise Posted July 28, 2020 Share Posted July 28, 2020 Kyle, Are you keeping the Roadster Link to comment Share on other sites More sharing options...
sligermachine Posted August 12, 2020 Author Share Posted August 12, 2020 well im up in the air on that Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now