alsancle

American Rolls Royce (Ghost, PI & PII)

Recommended Posts

JV Puleo    182

This really did come out of a barn... in New Jersey just about 45 years ago. I guess I looked pretty happy with my new acquisition. This was taken the morning we towed it home... down Rt. 95 through the center of Providence, RI. We (my friends and I) didn't own a trailer and didn't know anyone who did. I was 20 years old at the time.

 

S193FR-2.thumb.jpg.99053d145add66619cddb45d53c55e92.jpg

 

 

Share this post


Link to post
Share on other sites
alsancle    436

Nothing like a tow rope at 50 mph.  Think about the things that would happen 40 years ago without a second thought that would get you arrested these days.  

 

Joe, do you know where that car is now?

Share this post


Link to post
Share on other sites
JV Puleo    182

I've no idea. I looked it up in a RROC membership list once but now I forget where it was. That was still a long time ago. I worry that it may have been rebodied by one of the "only open cars are worth having" crowd. The rear section was Brewster faux cane work. It must have been very striking when new.

Share this post


Link to post
Share on other sites

Here is a little RR PI Springfield fun:  When I told a RR "authority" that my car was running on original DeJon coils the response was "Hell must have just frozen over, there are perhaps 3 known examples of original coils on the globe - well now I guess there are 5."  Unfortunately, they are also somewhat suspect so they are hitting the shelf for new coils.

 

By the way, the original coils have a dark red/maroon top on them - the Bakelite was painted black in an earlier restoration. 

 

I also took a picture of an original unrestored DeJon distributor data plate - the reproduction as silver  with black paint and this one is clearly silver with white paint. 

 

I have also been told the RR PI cars originally had ignition wire much like "Packard 440 wire" - I would agree from "quote original cars" I have seen, but the tool box was packed with a ratty original set of wire with all the original ends still on them - braided black lacquer wire .

21056238_10155825994952189_5153558429259018517_o.jpg

21078742_10155825998367189_5621014509290527364_n.jpg

21032477_10155825999822189_7609707473864317529_n.jpg

21083452_10155830082087189_1287378594101127687_o.jpg

Edited by John_Mereness (see edit history)

Share this post


Link to post
Share on other sites
On 8/28/2017 at 2:28 PM, JV Puleo said:

I think I have two more of them in a drawer...

 

j

Huge difference in how car ran w/new coils - my guess is a drawer is a good place for original DeJon coils

Share this post


Link to post
Share on other sites
JV Puleo    182

That's why I took them off! I think they came from a friend's completely original Newmarket PI.

Share this post


Link to post
Share on other sites
alsancle    436

So this Fleetwood bodied P1 was owned by a great family friend Ted Billings of Shrewsbury Ma back in the 50s and early 60s.   I was surprised when I stumbled on to it at Pebble Beach.

IMG_3105.JPG

TedBillingFleetwoodRolls-1.jpg

Share this post


Link to post
Share on other sites
SaddleRider    32
3 hours ago, alsancle said:

Are the American built Ghost and P1 Whiteworth?  How about the LHD PII?

 

I have never seen an American ( Springfield )  P II.  

Share this post


Link to post
Share on other sites
alsancle    436
31 minutes ago, SaddleRider said:

 

I have never seen an American ( Springfield )  P II.  

 

I guess I was a little ambiguous in my wording.  I know LHD PII chassis was built for the American market in Derby with Brewster doing final assembly.

 

I'm gonna guess the American built cars are not whitworth and the PII is but I don't know,  hence the question.

Edited by alsancle (see edit history)

Share this post


Link to post
Share on other sites
JV Puleo    182

Yes. American Ghosts and PIs are all Whitworth and, of course, PIIs are because they were built in England. It would be more proper to say Brewster built bodies. The chassis arrived fully assembled and road tested. RR would never have shipped the car any other way because they road tested every chassis and, buy the time the PII was available, the RR of America work force that was trained to do the tests was gone.

 

Interestingly, the Late Art Souter (he was the head of maintenance at RR of America from beginning to end) mentions that the idea of shipping some parts to the US rather than incurring the huge expense of tooling was considered but rejected by RR management.

 

As to the threads, this wasn't the problem it would seem today. The universal use of the standardized SAE threads we are all familiar with post dates WWI. Until then, there were numerous systems in use of which Whitworth was only one. It was, however, fairly common. It was only after the standarized threads had been accepted and were in universal use that it would have occurred to anyone that it might be a problem and, by then RR of America was on the way out. What we consider "standard" today was actually a culling of the many sizes readily available. For instance, there were 1/2-12, 1/2-13 and 1/2-14 bolts all in use at the same time. When the SAE selected 1/2-13, the other two sizes gradually went out of use – but this took years. Right into the mid 30s, the older sizes continued in use. As to cars... during WWI the Army organized the MTC - the Motor Transport Corps. This was to train men to drive and to repair motorized transport. Relatively few enlisted men could drive in 1917... in fact, nearly none except perhaps those who had driven a Model T Ford.  This didn't help much with the trucks and passenger cars the Army bought. The multiple thread systems proved a  logistical headache so, after the war, it was decided that no motor vehicles would be purchased by the government unless they conformed to a standarized threading system.

 

[EDIT] This came to me as an afterthought, but my great-uncle, Sam Pendleton, served in France with the 310 MTC. He arrived just before the Armistice and thus was kept behind with the Army of Occupation. I don't think he got home until about 1922. My uncle always liked cars and always had one. He may have already known how to drive when he entered the arm and would have been assigned to the MTC as a matter of course. Here he is shortly after he returned.


59b62780b1b6b_SamPendleton1.thumb.jpg.7c718ff129b254372fa74206a43418ab.jpg

 

 

As far as I know, these rules only applied to motor transport. I've owned at least one 1930s Brown & Sharpe milling machine, ex-Springfield Armory, that had a number of fasteners with very peculiar threads... as does my current B&S mill which, while not an ex-Armory machine, dates from the mid 30s.

Edited by JV Puleo
grammar (see edit history)
  • Like 1

Share this post


Link to post
Share on other sites
JV Puleo    182

I still have them...they came in handy when I had a Norton Commando. I actually have two or three sets of wrenches and sockets.

Share this post


Link to post
Share on other sites
On 9/10/2017 at 7:57 PM, alsancle said:

Great explanation.  Thanks Joe!

 

Did you have a complete set of whitworth tools to work on your car?

Yes, you have to have a Whitworth tool kit and it also helps to have a variety of truly precision adjustable wrenches too = I am very pleased to have a car that has from new spent its time in million dollar garages and has never seen a speck of rust in its life (ie I cannot imagine having to deal with even one rusted Whitworth nut or bolt).

 

Edited by John_Mereness (see edit history)

Share this post


Link to post
Share on other sites

And, the 1932 RR Phantom I Springfield makes its first public appearance in 36 years and first time to run in 18 years - at Dayton Concours d'Elegance this weekend !  I have put in 8 to 14 hours a day for two months and a week to get it out onto a showfield.  Original Owner was Valeria Langeloth of the current The Jacob & Valeria Langeloth Foundation

21551674_10155889594567189_1648171032584574339_o.jpg

21587040_10155892616002189_8279730080917141395_o.jpg

21686762_10155892616992189_3894146381541067000_o.jpg

21752673_10155892617437189_7492850854700955343_o.jpg

21640942_10155892617952189_3026825735742079648_o.jpg

21752875_10155892618332189_8828711555658261019_o.jpg

21753004_10155892619707189_417291772801671803_o.jpg

21752756_10155892627497189_4214175713502240565_o.jpg

  • Like 1

Share this post


Link to post
Share on other sites
JV Puleo    182

 

Here's another. This is one of Alden Handy's photos. The car is a straight windshield, iron head Newmarket convertible sedan. The picture was taken on Cape Cod, just after the end of WWII.

 

59c9a284c1fd8_PINewmarketemail.thumb.jpg.63ec1c0b7348a325a03f97395682b32b.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now