Sign in to follow this  
46 Poncho

1946 Pontiac Streamliner Clutch HELP ! Service Manual

Recommended Posts

Hi,

I am from Australia and recently received my 1946 Pontiac Streamliner Straight 8  3 speed manual ...

Upon receiving the car from the USA the clutch appears worn out. 

We have removed the clutch and it appears to be the incorrect clutch for this vehicle as it has obviously had some work on it it recently...

The pressure plate looks new as does the the lining however they have tried to shim out the clutch with washers to try to make this clutch work !

I have ordered a work shop manual but it is yet to arrive ....

Does anyone have any pictures of what the original clutch components look like ... or a extract from the service manual 

We are looking to compare these components with the original .... 

Any assistance would be greatly appreciated.

I may have to try and locate original clutch components for this vehicle.

 

 

Thanks in Advance

Share this post


Link to post
Share on other sites

 When I needed a new clutch disc for my Pontiac I took the old one into a GM Dealer and left with a 80's Camaro disc.  A quarter inch larger but the correct thickness and splines. You could also look at The Filling Station.  There listings are for Chevs and GMCs but many many pieces from Chevs fit Pontiac. https://www.fillingstation.com/catalog.htm

Good luck and Happy motoring.

Share this post


Link to post
Share on other sites

I'm saying a modern (late 70's early 80's I think) Camaro disk fits even though it is 1/4 inch larger in diameter. I never looked it up, the parts man just matched it to my old disk.  The friction material is different (coarser) but seems to have worked fine for 200,000+ miles, of course I only use the clutch for starting and going into reverse.  Most of the time I don't even double de-clutch, just match the revs and shift it is slower but easier on the left leg.  If traffic is really heavy and in a hurry I will use the clutch as it is faster.

Share this post


Link to post
Share on other sites

Thanks for the reply 

I have finally managed to sort out the problem I managed to locate another  ( correct ) clutch disc and pressure plate ! I have now fitted it and it works perfectly ! 

Turns out there were quite a few differences between the previous clutch disc and the new one. 

Guess they were trying to make do with what they had .... 

 

Thanks to everyone for the input !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this