Jump to content

Grant wood steering wheel installation


NC1968Riviera

Recommended Posts

I ordered a wood steering wheel from a vendor on Ebay the other day. It turned out to be a Grant wheel and hub.

The instructions were pretty straight forward but the contact spring they include is about 1/3 too long. On my first attempt installing the wheel, the horns blared when I hooked up the negative battery cable. I took everything apart and found the contact spring had gotten kinked outside the plunger sleeve included in the kit. I cut down to the kink then tried again. Again the horn blared. I cut a little more of the spring, which make it easier to install the whole unit. The third time was the charm. No horn blare when I connected the battery cable.

See the results!

20170610_203126.thumb.jpg.6449a25b6ed19b342835f6d5f5922a6f.jpg

This wheel is about 1" smaller in diameter than the original steering wheel. It also has a thicker ring which is much more comfortable for me to grip.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...