hadhec

1928 dictator engine and other help

Recommended Posts

I was a member and did advertise in rotating spokes and had no responses. If you know of anything that would be much appreciated. 

The number cast into the block behind the distributor is G.12.22

Share this post


Link to post
Share on other sites
7 hours ago, Gary_Ash said:

Damien:

You say that the 1930 engine with serial number S13775 doesn't fit your car.  But, what is it about that engine that causes the problem?  Does the transmission not fit the bell housing?  Are the motor mounts in the wrong place?  This should be a problem that can be solved easier than shipping another engine to Australia.

There are quite a few differences. Both the problems you list and others. I was really keen to fit this block because it is such a good one but there are to many differences and I am also a stickler for keeping things as original as I can.

Share this post


Link to post
Share on other sites

59c80590a4e39_Lightsixengine.thumb.png.76c2c9daa6c8f687501de059855525f8.png

59c80590a4e39_Lightsixengine.thumb.png.76c2c9daa6c8f687501de059855525f8.png

Let us know if you located an engine.

If you give me the casting number (not the engine number) cast in the block right

above the distributor  , I can look for a block.

The number yo gave G 12.22 is a casting date,

I am looking for a part number cast in the block.

Usually a 6 digit number such as 167889 or other.

I have some unidentified loose blocks.

Robert Kapteyn

casting number.png

 

The casting date you gave is for 1922 as far as I can tell.

Are you sure ?

Do you have pictures of your engine?

 

Light six engine.png

Edited by rbk (see edit history)

Share this post


Link to post
Share on other sites
7 hours ago, rbk said:

If you notice , this engine has a code of 9-15 22 and is a 1923 light six engine

Light six engine.png

Share this post


Link to post
Share on other sites

Hi Hadhec

 

Where are you located, send me an email.

 

I will keep my eyes open for an engine.

 

I recently found two EU engines for a friend, just by word of mouth.

 

Sometimes you have keep repeating the ad in Rotating Spokes until the right person sees it.

 

John Grant

Email, jgr13216@bigpond.net.au

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now