NC-car-guy Posted May 27, 2017 Share Posted May 27, 2017 Put a couple recessed over the laundry area... done 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted May 28, 2017 Author Share Posted May 28, 2017 (edited) Got a decent amount if work done in the garage today. Vacuumed up all debris that was hanging around. I was finally able to move to electrical work. For some reason the living room was linked up to half of the stuff in the garage. After track-walking the wire, I isolated the living room electricity from the garage and gave it its own dedicated line and breaker. Now I can do electrical work in the garage without disturbing the living room. I also had the same issue with the attic lighting and the other half of the garage. Went ahead and isolated the attic lights by giving it a dedicated line and breaker. The new setup so far is working well. Also was able to rip out most of the old outdated wiring and outlets in the garage. Tomorrow, I will begin running new wire for the new oulets. Still trying to figure out the lighting situation. New projects are always cool, but my Buick is calling my name. I really miss her. Edited May 28, 2017 by Kosage Chavis (see edit history) 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted May 29, 2017 Author Share Posted May 29, 2017 Finished up running wire for all my new outlets. The following pictures show 5 locations. The other 3 are in the laundry are (not shown). Work bench area:Area by large garage door:Area of location of the planned shelving unit:Still need to run wire for the new lighting. My wife and I need to make a decision by midweek. Stay tuned. 1 Link to comment Share on other sites More sharing options...
dship Posted May 29, 2017 Share Posted May 29, 2017 Here in Massachusetts (at least in my town), code requires an outlet every six feet whether it be refurb or new construction. Additionally, room must be split left side/right side with separate breakers. If one breaker trips, you still have illumination from outlets from the other breaker on the other side of the room...very logical really. Is it the same in your state? Link to comment Share on other sites More sharing options...
Kosage Chavis Posted May 30, 2017 Author Share Posted May 30, 2017 We have similar codes in this regard. My lights will be on seperate breakers from my outlets and my outlets are seperated by side (one side being the laundry area and the other side being everything else). The only thing I cut corners on was an outlet every 6 feet. It's more like a spacing of 6 to 7 feet. Link to comment Share on other sites More sharing options...
Kosage Chavis Posted May 31, 2017 Author Share Posted May 31, 2017 Need some help guys. I think we are going with the 4ft double strip LED lighting with 4000 lumens of brightness. I want to stay between 3 to 5 total lights on the garage ceiling (keep in mind I still plan on adding lights underneath the shelving area). Again, my garage dimensions are 28 L X 13 W X 10.5 H. Will 3 lights give me plenty of light or is 5 a must? Thank you. 1 Link to comment Share on other sites More sharing options...
JoelsBuicks Posted May 31, 2017 Share Posted May 31, 2017 Really a very good question KC because once things are covered up, ain't easy to go back and redo. Try this thought, install three lights but install five light boxes. Just pull the romex in and leave a loop of wire and a box cover. To me, there's never enough light. If I'm inside or under a car, I need more localized light. good luck and be safe, Joel 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted May 31, 2017 Share Posted May 31, 2017 11 hours ago, Kosage Chavis said: Need some help guys. I think we are going with the 4ft double strip LED lighting with 4000 lumens of brightness. I want to stay between 3 to 5 total lights on the garage ceiling (keep in mind I still plan on adding lights underneath the shelving area). Again, my garage dimensions are 28 L X 13 W X 10.5 H. Will 3 lights give me plenty of light or is 5 a must? Thank you. Read here: http://www.engineeringtoolbox.com/light-level-rooms-d_708.html 1 Link to comment Share on other sites More sharing options...
old-tank Posted May 31, 2017 Share Posted May 31, 2017 12 hours ago, Kosage Chavis said: Need some help guys. I think we are going with the 4ft double strip LED lighting with 4000 lumens of brightness. I want to stay between 3 to 5 total lights on the garage ceiling (keep in mind I still plan on adding lights underneath the shelving area). Again, my garage dimensions are 28 L X 13 W X 10.5 H. Will 3 lights give me plenty of light or is 5 a must? Thank you. 3 would be enough if 8' ceiling; 5 a must for 10.5' ceiling...best if room painted white. 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted May 31, 2017 Author Share Posted May 31, 2017 Okay sounds like I will go with 5. Thank you all for your guidance. Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 4, 2017 Author Share Posted June 4, 2017 Progress made. The general lighting came in yesterday. 5 as discussed.Also purchased the wall insulation. Bought 20 to get the bulk discount. I will just return what I don't use.Almost done with all the wiring. Setting up a 3 way switch system for the general lighting. Here's a shot of some of the overhead wiring for the lights.I ran out of wire. More to work on tomorrow. Link to comment Share on other sites More sharing options...
Mark Simmons Posted June 4, 2017 Share Posted June 4, 2017 Just a couple of coppers worth here. Make sure to put backing in place for mounting the fixtures to before insulation and drywall go up. Hollow wall anchors don't really work well. At least a two, preferably a three coat taping mud job on the drywall A good white primer and paint job will go along way to seal fumes from the rest of the house as well as have great reflective value. These are things that I've learned over the years that make a good,complete, long lasting job. 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 10, 2017 Author Share Posted June 10, 2017 Ran one of my wire ways incorrectly. Ran a 12/2 instead of a 12/3. Drew up a schematic and once I figured out what I did wrong, replaced part of my run. No worries though, all of my new wiring is dead. I was just double checking before I hook stuff up. 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 10, 2017 Author Share Posted June 10, 2017 Just got the new washer and dryer today.Starting the insulation today. 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 10, 2017 Author Share Posted June 10, 2017 Got about half of the garage insulated today. Turning it in now. I should finish by tomorrow. 3 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 11, 2017 Author Share Posted June 11, 2017 Back at it again today. The garage will have cable! Link to comment Share on other sites More sharing options...
alsancle Posted June 11, 2017 Share Posted June 11, 2017 Pull that RG6 to a back box (google arlington) which you flush mount in the wall with a duplex outlet. Or, get decora plate for a duplex low voltage mudring and the RG6 connector for a clean look. Don't just leave the wire through a hole. 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 11, 2017 Author Share Posted June 11, 2017 4 hours ago, alsancle said: Pull that RG6 to a back box (google arlington) which you flush mount in the wall with a duplex outlet. Or, get decora plate for a duplex low voltage mudring and the RG6 connector for a clean look. Don't just leave the wire through a hole. All of that will be taken care of when drywall goes in. I'm no expert, but I know that much. I try to be as thorough as possible. ? Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 11, 2017 Author Share Posted June 11, 2017 Wire way needs to be cleaned up before putting up more insulation. Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 11, 2017 Author Share Posted June 11, 2017 Clean!Back to insulation. 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 11, 2017 Author Share Posted June 11, 2017 About 85% done insulating the whole garage.I will finish it off next weekend. Turning it now. 2 Link to comment Share on other sites More sharing options...
avgwarhawk Posted June 13, 2017 Share Posted June 13, 2017 (edited) By the time you finish with all this nice lighting, wiring and drywall your wife will no allow the Buick in the garage! Edited June 13, 2017 by avgwarhawk (see edit history) 3 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 13, 2017 Author Share Posted June 13, 2017 30 minutes ago, avgwarhawk said: By the time you finish with all this nice lighting, wiring and drywall your wife will no allow the Buick in the garage! I already tried parking the Buick in the garage. Not enough room at all...and this was with both the front and rear bumbers removed. So no chance of that happening. The hope is that sometime in the next couple of years, I can build a brand new detached garage...made especially for rebuilding the Buick. In the meantime, this garage will allow me to do some other Buick work until that time comes. 4 Link to comment Share on other sites More sharing options...
avgwarhawk Posted June 14, 2017 Share Posted June 14, 2017 21 hours ago, Kosage Chavis said: I already tried parking the Buick in the garage. Not enough room at all...and this was with both the front and rear bumbers removed. So no chance of that happening. The hope is that sometime in the next couple of years, I can build a brand new detached garage...made especially for rebuilding the Buick. In the meantime, this garage will allow me to do some other Buick work until that time comes. Ah, method to the madness!!! 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 18, 2017 Author Share Posted June 18, 2017 Got all the insulation done yesterday. Now, ready to prep myself for drywall. Bought a drywall lift at Harbor Freight Tools. Very affordable and will serve its purpose.My daughter, of course, had to help with putting it together. Very simple process.That will probably be all for today. Next, I will purchase some drywall and start hanging it. Going to spend some time with the kids. Happy Father's Day everyone. 4 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 24, 2017 Author Share Posted June 24, 2017 Starting ceiling drywall installation. This lift works very well. 2 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 24, 2017 Author Share Posted June 24, 2017 Taking a long time in my progress, but it's coming along. Got one of hardest panels in with cutouts for the vent return and attic door. 3 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted June 25, 2017 Author Share Posted June 25, 2017 Most of the ceiling is complete. I only need to install 4 more panels to complete. I will finish the next time but looking good so far. 5 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted July 2, 2017 Author Share Posted July 2, 2017 Ceiling is done!Walls coming next. 5 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted July 17, 2017 Author Share Posted July 17, 2017 Progress this weekend. Here's a shot of a 12 x 4 panel being hung. I love this lift. It's been a total lifesaver. Drywalled the shelving area...and the rest of the wall below the shelving area...Planning to get little bits done during the week. 5 Link to comment Share on other sites More sharing options...
avgwarhawk Posted July 18, 2017 Share Posted July 18, 2017 Nice work! 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted July 19, 2017 Author Share Posted July 19, 2017 15 hours ago, avgwarhawk said: Nice work! Thank you Sir! Link to comment Share on other sites More sharing options...
Kosage Chavis Posted July 24, 2017 Author Share Posted July 24, 2017 Progress during the passing weekend. Removed the garage door to drywall correctly.Garage door removed.The bottom portions of the garage door rail base were rotted. I couldn't live with this.Replaced with new wood.New drywall installed.Garage door reinstalled. The counterweight was tough, but got it where I needed.That was it for that day. Drywall installation is now at about 85% complete. 4 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted August 1, 2017 Author Share Posted August 1, 2017 Didn't get a whole lot done over the weekend. Spent a lot of time trying to figure out how to reconfigure the laundry area. The old water heater will be replaced with a tankless water heater. The washer plumbing will get a new wall box with new connections for the hoses. Just unsure of which side to place the box. All that depends on which side we decide the washer will be on.A shot of the washer area. Put together pretty sloppy. This will all have to be ripped out and correctly replaced. Still thinking up a safe and sensible configuration.This is the capillary tubing that connects to our fridge. Someone tapped it off an existing line and ran it behind the washer and dryer, poked it through the drywall and connected to the fridge. This is all getting ripped out and correctly replaced with hard pipe and wall box.A shot of the cold and hot water pipes in the crawl space just before they terminate at the valve inside the garage. I will probable sweat lose the 1/2" pipe at the reduced end of both tee's and either reroute or replace. Whoever did the bends in this pipe, put bad kinks in the pipe. Again, more sloppy jobs.Got a few of my outlets installed. Link to comment Share on other sites More sharing options...
Mark Simmons Posted August 1, 2017 Share Posted August 1, 2017 K C They make a valve box for behind the fridge. You can run 1/2" copper pipe to it with a 1/4 turn angle stop on the end of it and then run a soft copper or a neoprene pre-made line to the back of the fridge. I did mine 10 years ago or more and it sure makes it easy when servicing or replacing the fridge or ice-maker. 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted August 2, 2017 Author Share Posted August 2, 2017 5 hours ago, Mark Simmons said: K C They make a valve box for behind the fridge. You can run 1/2" copper pipe to it with a 1/4 turn angle stop on the end of it and then run a soft copper or a neoprene pre-made line to the back of the fridge. I did mine 10 years ago or more and it sure makes it easy when servicing or replacing the fridge or ice-maker. Already there. Purchased the fridge valve box along with the washer valve box last weekend. Trying to figure out the placement. I will post the progress. Link to comment Share on other sites More sharing options...
Larry Schramm Posted August 3, 2017 Share Posted August 3, 2017 (edited) On 8/1/2017 at 4:47 PM, Mark Simmons said: K C They make a valve box for behind the fridge. You can run 1/2" copper pipe to it with a 1/4 turn angle stop on the end of it and then run a soft copper or a neoprene pre-made line to the back of the fridge. I did mine 10 years ago or more and it sure makes it easy when servicing or replacing the fridge or ice-maker. I did that on both of my fridges. It is a great item to have instead of just a piece of tubing going somewhere with a turn off valve somewhere. Here is one. http://www.homedepot.com/p/SharkBite-1-2-in-Ice-Maker-Outlet-Box-with-Water-Hammer-Arrestor-25033/205545581 Edited August 3, 2017 by Larry Schramm (see edit history) Link to comment Share on other sites More sharing options...
Kosage Chavis Posted August 21, 2017 Author Share Posted August 21, 2017 Worked myself to the bone over the passing weekend. Drywalled the utility box area.Started on plumbing. Here's one partial assembly.Newly installed water and drain plumbing underneath the house in the crawl space. This portion serves the washer.The branch of water plumbing serves the water for the fridge.Valve box for fridge.Valve box inside the kitchen.Valve/drain box for washer.A lot of work, but done. 1 Link to comment Share on other sites More sharing options...
avgwarhawk Posted August 21, 2017 Share Posted August 21, 2017 Looks good man. 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted August 28, 2017 Author Share Posted August 28, 2017 Didn't get a whole lot done this weekend, but was able to hang up one of my last pieces of drywall and clean up the laundry area.Next up...stair rails. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now