OK TOM Posted March 28, 2017 Share Posted March 28, 2017 Hi guys. I am trying to install the webbing on my shocks. Do you pre load the shock before installing the webbing? If so how much? Also how does the wedge at the bottom install? Pictures would be great. Thanks Tom Link to comment Share on other sites More sharing options...
OK TOM Posted March 28, 2017 Author Share Posted March 28, 2017 Jut bumping this up. Still looking for help. Thanks Tom Link to comment Share on other sites More sharing options...
unimogjohn Posted March 30, 2017 Share Posted March 30, 2017 Tom, my 28 did not have any webbing when I got it in 1984. And no instructions as I remember. I bought some surplus mechanical belt and cut it to size. I do not know if the following is right or wrong, but it is how I installed them. Pre-load. I just made sure that at rest with the wheels on the ground, about an inch of preload. As I remember a wedge goes in the rectangle hole to hold the webbing in place. In taking pics in a confined space I really could not see how I attached them. Hopefully, the pics will give you an idea. If you cannot figure it out I will pull the car out of its resting place and take a closer look. Link to comment Share on other sites More sharing options...
OK TOM Posted March 31, 2017 Author Share Posted March 31, 2017 Thank you John, this is very helpful. Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now