shelbyone Posted March 21, 2017 Share Posted March 21, 2017 most of the time, my horn works only when activating it for at least 3 to 5 seconds..starts with 1 tone, then 2 then all 3...sounds a little weak due to something I was not able to discover yet... all hoses are replaced and tight, connections look good... what could prevent my horn from beeping right away? anyone? Link to comment Share on other sites More sharing options...
shelbyone Posted March 21, 2017 Author Share Posted March 21, 2017 how about replacing the whole thing with this; FIAMM 74100 El Grande Link to comment Share on other sites More sharing options...
Moparite Posted March 21, 2017 Share Posted March 21, 2017 Sounds like the air compressor is taking to long to generate air.. Link to comment Share on other sites More sharing options...
TwinCamFan Posted March 22, 2017 Share Posted March 22, 2017 Pull the air hose off at the horn end, spray a 'generous amount' (like a lot) of 3 in 1 or similar oil and let it run down into the compressor motor for a minute or two. Leave the oil in there and reconnect the hose. Hit the horn button. Fixed. Yes, you want the oil going the other way into the megaphone assembly too, it also needs lube. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now